Manual Precor 240I Stretch Trainer (page 13 of 32) (English)

604343

Zoom out

Zoom in

1/32

Assembling the StretchTrainer 11

Assembling the StretchTrainer

CAUTION: At least two people are required to position the parts

of this equipment successfully. Do not attempt to assemble the

equipment by yourself. Fully assembled, the StretchTrainer

weighs over 60 pounds.

Proper alignment and adjustment of the equipment is critical.

When you install fasteners, leave room for adjustments. Do not

tighten the fasteners completely until you are instructed to do so.

Make sure the equipment is stable and placed on a solid surface.

Optional tools:

 Open-end adjustable wrench

 Pair of needle-nose pliers

To begin assembly:

1. Set the base rails on the floor and remove the two bolts

and two flat washers on the underside of the rails.

2. While your assistant holds the upright supports, slide the

seat bracket under the base rails and align the mounting

holes. Place the alignment bracket in between the base

rails and secure it using the two 5-inch bolts, four flat

washers, and two locknuts from the hardware kit.

Figure 3: Alignment bracket and base rail assembly

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor 240I Stretch Trainer in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor 240I Stretch Trainer Manual

Product: