782000
43
Zoom out
Zoom in
Previous page
1/68
Next page
GB | 35
E11 No boundary signal
When the mower is in the working area, check the charging station LED
indicator. If it lights up red, make sure that the boundary wires are well
connected to the terminals on the charging station. If the problem per-
sists, check whether the boundary wires have been cut.
E2 Wheel motor blocked
Switch the mower o󰀨. Move the mower to an area that is free of obsta-
cles. Press the “START” button and then the “OK” button.
If the error message is still displayed, switch o󰀨 the product. Turn the
mower upside down and check what is preventing the wheels from turn-
ing.
Remove the objects blocking the wheel(s), turn the mower over.
Then press the “START” and “OK” buttons.
E3 Cutter disc blocked
Switch the mower o󰀨.
Turn the mower upside down and check what is preventing the blades
from turning.
Remove the objects and turn the mower over.
Place the mower in an area with short grass.
Then press “START” and “OK.
E4 Obstacle sensor trigger not
reset
Contact your specialist dealer.
Take the mower to a specialist dealer.
E5 The mower was lifted
Switch the mower o󰀨.
Move the mower to an area that is free of obstacles. Press the “START”
button and then the “OK” button.
If the error message is still displayed, switch o󰀨 the product. Turn the
mower upside down and check if there is anything preventing the front
axle from moving.
Remove all obstacles, turn the mower up the right way again and switch
it on. Press “START” and then “OK”.
E6 Roll-over sensor was trig-
gered
Stand the mower upright.
Press “START” and then “OK”.
E7 Inclination sensors were
triggered
Switch the mower o󰀨.
Move the mower to an area in your lawn with level ground.
Switch the mower on. Press “START” and then “OK”.
E8 Docking/recharging failed
Check that there is 1 metre of space before and after the charging sta-
tion, without obstacles or corners.
The charging station must be placed on level ground.
Manually place the mower in the charging station for charging. After the
mower is fully charged, press “START” and then “OK”.
BP Rechargeable battery ther-
mal protection
Switch the mower o󰀨.
Move the mower to an area in your lawn with level ground.
Check the temperature of the rechargeable battery.
If the temperature is too high, let the rechargeable battery cool down.
If the temperature is too low, wait until the temperature is higher than 5°C.
Re-start the mower.
If the error still occurs, replace the rechargeable battery.
If the error still occurs, contact your specialist dealer.
EE Error unknown Re-start the mower.
If the error still occurs, contact your specialist dealer.
LOCK
Robot mower locked (PIN
entered incorrectly too
many times)
Wait 10 minutes and then enter the PIN again
Do not switch the robot mower o󰀨
If the error still occurs, contact your specialist dealer.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Practixx PX-RRM-600WI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Practixx PX-RRM-600WI in the language / languages: English, German, French as an attachment in your email.

The manual is 6.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info