152584

Pqi m pack800 Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
2211
Getting Started
ENG
2200
Getting Started
Connecting the mPack to a PC
By connecting the mPack to a PC with the USB cable included in the
package, you can directly transfer data between the two.
• Even when the power is on, you still can connect the product to a PC
for its use.
• After connecting the product to a PC with its power off, it powers on
automatically. If you run Windows' safe removal of hardware tool and
unplug the USB cable after completing all the tasks, the product
powers off automatically. For more information on safe removal of
hardware, please refer to Disconnecting the mPack from a PC(22p.).
NOTE
Connect the product to the PC with the USB cable provided. The smaller
end connects to the mPack, the larger end directly into a USB port on
the PC.
When the connection has been made properly, the icon appears in
the Windows System Tray as shown below.
Open "My Computer". You will see a new hard drive available, named
"mPack".
For Windows 98 systems, the product may not be automatically detected
by the system. If this happens, install the driver provided. For more
information on device drivers, please refer to [Getting Started - Program
Installation - Device Driver Installation on page 26].
NOTE
The default folders on the hard disk drive of the mPack are Video, Photo,
Game, System, Backup, and &#^ Contents ^%. These folders are needed
to ensure corrent operation of the mPack. They should not be deleted or
renamed or the mPack will not function correctly.
WARNING
Do not remove the USB cable when downloading or uploading files or
without running Windows' safe removal of hardware tool. This may cause
file system errors on the hard disk drive of your PC or the product. Should
this occur, you must run the scan disk utility on the PC to correct the
errors. Data loss may result when you continue to use the product without
correcting errors.
WARNING
Drag and drop data to and from the mPack and the PC.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pqi m pack800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pqi m pack800 in the language / languages: English as an attachment in your email.

The manual is 11,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info