534698
23
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 22
3.3.2 Calibrating the Nozzle Height
This section is probably the most important of the entire manual. Please
read it carefully to ensure that you understand the nozzle height setup
procedure, as it is vital to successful 3D printing.
To print successfully, the platform should be set to start at a distance of 0.2mm
from the nozzle. As each printer is slightly different, this distance needs to be
calibrated before starting to print. The correct distance between the nozzle
and platform is recorded in the “Nozzle” box of the “Print” screen (found
under the “3D Print” menu, but we use the Maintain” dialogue box to
figure out what this distance should be.
NOTE: It is only possible to move the nozzle to 1 mm higher than the height
recorded in the Printscreen. If, for example, the nozzle height in the
Print‖ screen is set to 130mm, you will only be able to move the nozzle
up to 131mm in the ―Maintenance‖ screen. This maximum value is
indicated by the ―Max‖ value shown in the platform and nozzle line of the
―Maintain‖ screen.
If you are having problems adjusting the nozzle height in the
―Maintenance screen because it will not go high enough, close the
―Maintenance‖ screen, open the ―Print‖ screen, and set the nozzle
height to 140mm (for example). Then go back to the ―Maintenance‖
screen and continue with your nozzle height adjustments.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info