Please Note: When using the frying basket, we recommend shaking the food halfway through the cooking time, to guarantee a consistent cooking
preparation.
USE OF THE ACCESSORIES
Use of the grill (Illustration 2 & 3)
1. Place the drip tray on the bottom of the appliance.
2. Push the grills into the side guide rails as far as the rearmost edge. (Illustration 2).
3. For crispy and quick results, place the grills higher up in the appliance (Illustration 3).
4. Change the grills halfway through the cooking time, in accordance with the rotation principle, to attain a consistent result..
Mounting of the Small Skewer (Illustr. 8-9).
1. Place both small skewer-holders on both sides of the revolving skewer. Make sure that the set screws are facing outwards and pay attention to the side markings –
for right (R) and left (L). (Illustr. 8).
2. Tighten the screws carefully, but not too tightly, as you may need to readjust the small skewers after attachment.
3. Pierce the small skewers carefully through the food to be cooked.
4. Insert each loaded small skewer into the holes provided for it on the left small skewer-holder (Illustr.9).
5. Press the clip-ends of each small skewer together, while inserting it into the opposite, corresponding right-hand opening of the small skewer-holder.
6. Release the clip so that the small skewer can lock into place – as illustrated (Illustr. 9).
7. Repeat steps 4 to 6 until all small skewers have been evenly mounted.
8. Tighten the set screws securely.
9. When inserting the holder, take care not to jab yourself on the skewer.
Placing the skewer or the revolving basket in the appliance
1. First, insert the left-hand side of the skewer or revolving basket into the provided indentation. Make sure that the skewer or the revolving basket is well locked in, in
order to rotate (Illustr.10).
2. Now place the right-hand side into the indentation (Illustr.11).
Removal of the revolving skewer or the revolving basket from the appliance
1. Open the appliance, to interrupt the cooking process, or switch the appliance off by means of the on-off button.
2. Now insert the support-handle below the skewer.
3. Lift the support-handle at a gentle angle, to open the clip, then push it rightwards, until the left-hand side of the skewer slips out of the indentation.
4. Carefully remove the grilled food from the oven.
IMPORTANT: Please pay attention to illustration 5, which shows the left and right-hand sides of the skewer, before putting the skewer into place in the appliance. The
right-hand side has two indentations, the left-hand one (Illustr. 5).
HOW TO REMOVE THE FRYING BASKET FROM THE APPLIANCE WHEN IT IS HOT:
1. Use the frying basket handle or an oven glove to remove the frying basket from the hot PowerXL Air Fryer Multi-Function. (Illustration 12).
2. Attach the handle securely to the upper rim of the frying basket, to carefully remove it from the hot PowerXL Air Fryer Multi-Function. (Illustration 13).
3. Always place the hot frying basket on a heat-resistant surface, before removing the handle. (Illustration 14).
4. You do not need to use the frying basket handle when inserting the cold frying basket.
5. You can also use the frying basket handle to remove the frying basket halfway through the cooking time to shake the ingredients or to season.
Use of the digital control panel (Illustration 15)
1On/Off/Start-Stop Button –As soon as the appliance is connected to the power supply, the On-Off/Start-Stop button illuminates. Now press the On-Off/Start-
Stop button once and the entire display lights up. When you press the button once again, the cooking process begins with a standard temperature of 185 ° C and a
cooking time of 15 minutes. If you press the On-Off/Start-Stop button during the cooking process, the appliance will switch off. „Off“ appears on the display panel
and the ventilator will continue to run for a further 20 seconds, to cool the appliance down.
2Interior Lighting – When pressing this button, you can clearly see the progress of the cooking. Press the button again to switch off the light. Please note: If you
open the door during the cooking process, the preparation process is interrupted. The interior lighting switches itself on when the door is opened. Take care when
opening the door, as it is solidly built and heavy. When you close the door again, the interior lighting switches itself off and the cooking process is continued.
3Rotation Button – Press this button when you would like to prepare something in rotation mode. This function can be selected with any presetting. The symbol
blinks during the process.
4Temperature Control Buttons – With these buttons you can increase or reduce the temperature by 5 degrees within a range of 65°C to 200 °C . When
dehydrating the range is between 30 °C and 80 °C.
5Time-Control Buttons – Here you can set the cooking time to the exact minute. In all programmes, the time setting possible amounts to 1 to 60 minutes. When
dehydrating, however, only 30 minute intervals are possible, with an operating time of 2 to 24 hours.
6Digital LED Display – The numerical, digital display alternates, during the cooking time, between temperature and the remaining preparation process time.
7 - 14 Pre-installed Programmes –When you select one of these programmes, pre-defined time and temperature settings for the preparation of certain dishes
are used. You can modify these programmes with the time and temperature control buttons. Table 1 gives you an overview of all pre-installed programmes.
15Running Lights – These lights light up during the cooking process and blink for a further 20 seconds after switching off the appliance.
M16438_M16439_M16440_M16441_PAF Multi Function_Manual_20211207_BS.indd 14M16438_M16439_M16440_M16441_PAF Multi Function_Manual_20211207_BS.indd 1407.12.21 11:3107.12.21 11:31
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for PowerXL M16439 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of PowerXL M16439 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish as an attachment in your email.
The manual is 2.16 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
