685350
98
Zoom out
Zoom in
Previous page
1/204
Next page
BASLER MODEL AVC63-4 VOLTAGE REGULATOR
Control is different on previous versions of the AVC63-4. When adjusting the Underfrequency Control
on previous versions, clockwise rotation decreased the corner frequency while counterclockwise
increased the corner frequency.
NOTE: Further reference to corner frequency adjustments of the AVC63-4 are for the Current Version
and should be reversed for the Previous Version.
JUMPER CONTROLS
:
POTENTIOMETER CONTROLS:
The AVC63-4 potentiometer controls are located on the components and terminals side of the controller.
Voltage control, Stability control and Underfrequency control allow for fine-tuning the controller to a
specific application.
INPUT POWER / SENSING INPUT:
Power for the exciter field and AVC63-4 is derived from the generator output. The acceptable power
input range is 171 to 264 V AC and is connected to terminals 3 and 4.
EXCITER FIELD POWER CIRCUIT:
Controller terminal F+ is connected to the brushless exciter field positive terminal and controller
terminal F- is connected to the brushless exciter field negative terminal.
6
Two jumpers connect to the controller
terminals: the Corner Frequency Jumper
and the Voltage Adjust Rheostat Jumper.
Corner Frequency Jumper
The AVC63-4 is typically set with this
jumper connected to the 60 Hz terminal.
This gives a corner frequency of 55 Hz.
For 50 Hz operation and a corner
frequency of 45 Hz, the Corner Frequency
Jumper must be moved to the 50 Hz
terminal.
Voltage Adjust Rheostat Jumper
The Avc63-4 is typically set with the
Voltage Adjust Rheostat Jumper connected
across terminals 6 and 7. This enables
adjustment of the generator output voltage
through the controller’s internal voltage
control potentiometer. Clockwise rotation
of the voltage control increases generator
voltage.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTS-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTS-40 in the language / languages: English as an attachment in your email.

The manual is 14,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info