685350
44
Zoom out
Zoom in
Previous page
1/204
Next page
23CARRIAGE AND STORAGE
ENGLISH
CARRIAGE AND STORAGE
CARRIAGE
CAUTION
To avoid personal injury:
A Fix the engine securely not to fall
during operation.
A Do not stand near or under the
engine while carrying it.
A The engine is heavy. In handling it,
be very alert not to get your hands
and body caught in.
1. Use carrier such as crane when carrying the engine,
or hurt your waist and yourself. Support the engine
securely with rope not to fall while carrying it.
2. When lifting the engine, put the hook securely to
metal fittings attached to the engine. Use strong
hook and fittings enough to hang the engine.
STORAGE
CAUTION
To avoid personal injury:
A Do not clean the machine with
engine running.
A To avoid the danger of exhaust fume
poisoning, do not operate the
engine in a closed building without
proper ventilation.
A When storing the engine just after
running, let the engine cool off.
Before storing the engine for more than a few months,
remove any dirt on the machine, and:
1. Drain the coolant in the radiator. Open the cock at
the bottom of the radiator, and remove the pressure
cap to drain water completely. Leave the cock open.
Hang a note written "No water" on the pressure cap.
Since water may freeze when the temperature drops
below 0°C (32°F), it is very important that no water is
left in the machine.
2. Remove dirty engine oil, fill with new oil and run the
engine for about 5 minutes to let the oil penetrate to
all the parts.
3. Check all the bolts and nuts, and tighten if
necessary.
4. Remove the battery from the engine, adjust the
electrolyte level, and recharge it. Store the battery in
a dry and dark place.
5. When the engine is not used for a long period of
time, run it for about 5 minutes under no load every
2 to 3 months to keep it free from rust. If the engine
is stored without any running, moisture in the air may
condense into dew over the sliding parts of the
engine, resulting in rust there.
6. If you forget to run the engine for longer than 5 to 6
months, apply enough engine oil to the valve guide
and valve stem seal and make sure the valve works
smoothly before starting the engine.
7. Store the engine in a flat place and remove the key
from engine.
8. Do not store the engine in a place where has
flammable materials such as dry grass or straw.
9. When covering the engine for storage, let engine
and muffler cool off completely.
10.Operate the engine after checking and repairing
damaged wirings or pipes, and clearing flammable
materials carried by mouse.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTS-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTS-40 in the language / languages: English as an attachment in your email.

The manual is 14,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info