685350
37
Zoom out
Zoom in
Previous page
1/204
Next page
16 PERIODIC SERVICE
ENGLISH
4. If the oil level is too low, remove the oil filler plug, and
add new oil to the prescribed level.
5. After adding oil, wait more than 5 minutes and check
the oil level again. It takes some time for the oil to
drain down to the oil pan.
* API service classification: above CF grade
A Engine oil should be MIL-L-2104C or have
properties of API classification CF or higher.
Change the type of engine oil according to the
ambient temperature.
A When using oil of different brands from the previous
one, be sure to drain all the previous oil before
adding the new engine oil.
A Be sure to inspect the engine, locating it on a level
place. If placed on gradients accurately, oil quantity
may not be measured.
BChanging engine oil
CAUTION
To avoid personal injury:
A Be sure to stop the engine before
draining engine oil.
A When draining engine oil, place
some container underneath the
engine and dispose it according to
local regulations.
A Do not drain oil after running the
engine. Allow engine to cool down
sufficiently.
1. Change oil after the initial 50 hours of operation and
every 500 (for DI spec), 250 (for IDI spec) hours
thereafter.
When the annual operating hours are below 500 (DI
spec) or 250 (IDI spec), replace the oil every year.
2. Remove the drain plug at the bottom of the engine,
and drain all the old oil. Drain oil will drain easier
when the oil is warm.
3. When letting out the oil, remove the filler plug too.
With the filler plug still in place, it would be difficult to
discharge the oil completely.
4. Add new engine oil up to the upper limit of the oil
level gauge. Be careful not to add oil above the
upper limit of the oil level gauge.
Models Engine oil quantity
V3600-E3, V3600-T-E3,
V3800-DI-T-E3,
V3300-E3BG,
V3600-T-E3BG,
V3800-DI-T-E3BG
13.2 L (3.49 U.S. gal.)
above 25°C (77°F)
SAE30 or SAE10W-30
SAE15W-40
0°C to 25°C (32°F to 77°F)
SAE20 or SAE10W-30
SAE15W-40
below 0°C (32°F)
SAE10W or SAE10W-30
SAE15W-40
(1) Oil drain plug
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTS-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTS-40 in the language / languages: English as an attachment in your email.

The manual is 14,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info