685368
11
Zoom out
Zoom in
Previous page
1/42
Next page
PRE-OPERATION CHECK
N
GINE BREA
K
-IN PERIOD
u
ring the engine break-in period, observe the following recommendations:
Change the engine oil and oil filter cartridge after the first 50 hours of operation.
(See “ENGINE OIL” in ENGINE MAINTENANCE SERVICE SCHEDULE).
In ambient temperature above 32°F (0°C) approximately 3-5 minutes without a load is sufficient
for engine warm up. Allow additional warm up time when temperatures are below 32°F (0°C)
before placing an operating load on the engine.
A
ILY CHEC
K
o
prevent future engine problems from occurring, it is important to know and keep track of the engines
o
ndition. Below are items to be Inspected and Checked on a daily basis.
A
UTION:
o
avoid personal injury:
Be sure all safety shields and guards are attached to the engine when operating.
To prevent a fire hazard, keep foreign materials, fuel and oil away from the battery, wiring, muffl
and engine. Check and clear them daily. Be aware of the muffler and exhaust gas heat underneat
h
engine compartment, this heat may ignite grass or other flammable materials.
Follow all safety precautions as outlined in the “SAFE OPERATION” section.
For accurate readings the engine should be on level ground when checking engine fluids.
Check fluids before starting the engine. (Cold Engine)
Lubrication System: Check Engine oil level
Check for Engine oil leaks
Cooling System: Check coolant level and condition
Check for coolant leaks
Check for proper installation of the radiator cap
Fuel System: Check for sufficient quantity of fuel
Check for fuel leaks
Check engine after starting. (Warm Engine)
Proper Operation: Check for easy engine start
Check for fluid leaks
Check for abnormal engine noises
Check for abnormal exhaust gas
1
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTS-20KSI-2-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTS-20KSI-2-A in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info