685354
49
Zoom out
Zoom in
Previous page
1/66
Next page
MOTOR LOADS
When figuring generator set capacity requirements for installation involving motor loads, do not
overlook the high current demanded by the motor during start-up. The “In-Rush” of starting current may
be 2 to 5 times higher than that required when the motor reaches normal operating speed. Reserve
capacity must be allowed for in rush demands plus other loads, which could be on the line as the motor
starts.
Air conditioning units are the most common type of motor loads for a generator set in a
recreational vehicle. The starting characteristics of the different makes of air conditioners vary greatly.
For example, a particular 12,000 BTU unit may have lower starting requirements than a 10,000 BTU
unit of another make. When only one unit is involved there is usually no starting problem provided of
course the lighting and appliance load is not too high when unit is started.
The trend seems to be toward larger capacity air conditioners and the use of more than one unit in larger
vehicles. Simultaneously starting two large units can present a problem if the capacity is marginal.
Because of the variation in starting characteristics of the different makes of air conditioners, no definite
statement can be made in this publication regarding multiple-motor starting capabilities.
Delayed starting or use of “easy starting” devices on air conditioner units should be considered
whenever simultaneous starting of more than one motor is involved. The starting and running
requirements of some motor loads common to mobile applications are listed in the table below. Use this
as a guide when selecting generator set capacity requirements involving motor loads. Also note the
Kilowatt De-rating factor for generator set capabilities regarding air conditioners. Capabilities will vary
according to “Kilowatt De-rating”.
BASED ON CODE “G” ELECTRIC MOTOR ELECTRIC MOTOR
HORSEPOWER
STARTING WATTS RUNNING WATTS
½ 2000 1100
1 3800 1800
2 6000 2800
3 8000 4000
4 11000 5500
5 13000 6500
KILOWATT DE-RATING
All units are rated at 1.0 power factor. The Kilowatts of the generator set will decrease 3.5% per
1,000 feet (305m) above 500 feet (152m) above sea level. De-rate 1% for every 10 °F (5.5°C) above
68°F.
ELECTRICAL LOADS
While the electrical load of the vehicle should have been calculated prior to purchase of the generator
set, you may want to recheck the load before installing the set to make sure the capacity is ample to meet
the demands without possible overloading.
The lighting load is usually easiest to calculate in most cases, simply add the wattage of each
lamp to be operated off the generator set. Note that in many applications, not all of the lights or lamps
are in the generator sets AC circuit. Some are DC powered by the 12-volt battery in the vehicle. Make
sure the total includes only lights actually on the generator sets AC circuit. The lighting load is usually
not to heavy in mobile installations however it must be accurately calculated to prevent overloading. For
example, if all lights are on at the same time and the air conditioner or other motor equipment starts up,
this may possibly cause an overload situation.
14
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTS-20 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info