Manual PowerTech PTRV-12 KSI (page 11 of 51) (English)

685361

Zoom out

Zoom in

1/51

PRE-OPERATION CHECK

ENGINE BREAK-IN PERIOD

During the engine break-in period, observe the following recommendations:

1. Change the engine oil and oil filter cartridge after the first 50 hours of operation.

(See “ENGINE OIL” in ENGINE MAINTENANCE SERVICE SCHEDULE).

2. In ambient temperature above 32°F (0°C) approximately 3-5 minutes without a load is sufficient

for engine warm up. Allow additional warm up time when temperatures are below 32°F (0°C)

before placing an operating load on the engine.

DAILY CHECK

To prevent future engine problems from occurring, it is important to know and keep track of the engines

condition. Below are items to be Inspected and Checked on a daily basis.

CAUTION:

To avoid personal injury:

• Be sure all safety shields and guards are attached to the engine when operating.

• To prevent a fire hazard, keep foreign materials, fuel and oil away from the battery, wiring, muffler

and engine. Check and clear them daily. Be aware of the muffler and exhaust gas heat underneath the

engine compartment, this heat may ignite grass or other flammable materials.

• Follow all safety precautions as outlined in the “SAFE OPERATION” section.

1. For accurate readings the engine should be on level ground when checking engine fluids.

2. Check fluids before starting the engine. (Cold Engine)

• Lubrication System: Check Engine oil level

Check for Engine oil leaks

• Cooling System: Check coolant level and condition

Check for coolant leaks

Check for proper installation of the radiator cap

• Fuel System: Check for sufficient quantity of fuel

Check for fuel leaks

3. Check engine after starting. (Warm Engine)

• Proper Operation: Check for easy engine start

Check for fluid leaks

Check for abnormal engine noises

Check for abnormal exhaust gas

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTRV-12 KSI in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PowerTech PTRV-12 KSI Manual

Product: