685358
35
Zoom out
Zoom in
Previous page
1/44
Next page
UNDER VEHICLE INSTALLATION
PTRV-3 and PTRV-3 RR Model Generators which are designed to be installed
under a vehicles floorboard require specific mounting considerations. These units are
specifically engineered to be suspended from the underside of a vehicle. The anti-
vibration mounting hardware supplied is capable of supporting the units’ suspended
weight. An additional safety bolt is incorporated into each mounting bracket as a back-up
safety measure. The unit must be carefully positioned so not to interfere with any of the
vehicles components or systems. The vehicles frame and/or floor structure must be
capable of supporting the suspended weight. Additional support material must be added if
necessary. Use ½” Grade 8 mounting Bolts and Lock Nuts to secure the unit through the
frame or floorboards.
IMPORTANT: When mounting a unit through the floorboards it is Highly
Recommended
to add a backing plate of sufficient size and material to the inside of the
floorboards to distribute the weight and strengthen the area against flexing. Small
diameter flat washers are not adequate for this application and must not be used.
SPLASH GUARD
PTRV-3 and PTRV-3 RR Model Generators which are mounted in an under
vehicle installation maybe subjected to adverse road conditions such as water, mud,
debris, etc. To protect the unit against damage from these elements it is advisable to
install Splash Guards to prevent these elements from entering or clogging the air intake or
outlets of the enclosure. When a Remote Radiator is used in the installation, protecting
the fan and radiator core is essential. (See the following section on Remote Radiator
Installation for more Information).
REMOTE RADIATOR
PTRV-3 RR Model Generators are designed and manufactured to be installed
using a remotely mounted radiator unit to maintain normal engine operating temperature.
The remote radiator is housed inside a shroud which protects the radiator core and
facilitates mounting to the vehicle. A 12V DC electric fan mounted to the shroud insures
a positive air flow through the radiator.
The remote radiator unit must be mounted to a section of the vehicles undercarriage
that is free of obstructions. Cool ambient air must flow freely to the fan. Avoid heat generating
components such as engine, transmission, exhaust muffler, etc. Heat shields should be installed if
necessary. If heat shields and or splash guards are installed be sure the air flow into and out of
the unit is unobstructed. It is also important to prevent the recirculation of the heated discharged
air. Hoses and electrical wiring must be safely and securely routed to avoid any vehicle moving
components such as drive shaft, axle housing and springs. Only use automotive clamps and
locking fasteners for installation.
A remote mounted reservoir tank is provided to fill and maintain the cooling system at
the proper coolant level. The reservoir tank must be located above the height of the generator and
remote radiator unit.
IMPORTANT: To prevent overheating be sure all air bubbles are removed from the cooling
system prior to extended service. Check and maintain the coolant level at recommended
intervals.
6
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTRV- 3 RR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTRV- 3 RR in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info