685364
11
Zoom out
Zoom in
Previous page
1/42
Next page
MOUNTING THE PT-3000 TO THE FRAME
Be sure to use a forklift, transmission jack, overhead lift or other device to lift the
PT-3000. Make sure the unit is stable before trying to place it on the frame rail. Determine
the height the unit needs to be installed and secure the mounting brackets to the enclosure.
Place the unit in the desired location and mark the mounting holes on the frame side rail.
Drill the frame rail to accept the 5/8” bolts and securely fasten.
EXHAUST PIPE
Maintain a minimum 3” clearance between any exhaust components and any
surrounding combustible materials. If the minimum clearance cannot be met an insulating
shield designed for exhaust components must be used. Extend the exhaust outlet a
minimum of 1” past the perimeter of the vehicle. The exhaust system CANNOT be
terminated under the vehicle chassis. Exhaust outlet must be in a position, which prevents
exhaust gases from entering the living quarters. The exhaust system should be routed in a
manner, which eliminates the possibility of re-circulation into the PT-3000 enclosure.
A skid plate may be installed to protect the PT-3000 and exhaust system from road hazards.
Joining the PT-3000 exhaust together with the trucks main exhaust may cause irreparable
harm pleases consult with Power Tech prior to making any such connections.
EXHAUST GASES AND FIRE PREVENTION
Engine exhaust fumes can be very harmful if allowed to
accumulate. Be sure to run the engine in a well-ventilated area
where there are no people or livestock near by.
The exhaust gas from the muffler is very hot. To prevent a fire,
to not expose dry grass, oil or any other combustible materials
to exhaust gas. Keep the engine and mufflers clean all the time.
To avoid a fire, be alert for leaks of flammables from hoses and
lines. Be sure to check for leaks from hoses and pipes, such as
fuel and hydraulic by following the maintenance check list.
To avoid a fire, do not short across power cables and wires.
check to see that all power cables and wires are in good
condition. Keep all power connections clean. Bare wire or
Frayed insulation can cause a dangerous electrical shock and Personal injury.
8
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PT-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PT-3000 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info