685364
7
Zoom out
Zoom in
Previous page
1/42
Next page
SAFETY ALERTS AND PRECAUTIONS
A generator set can be potentially dangerous if not properly
maintained and operated. The Best safeguard against a
dangerous situation is education, good judgment and common
sense. For safe trouble free operation of your generator set
some general precautions are listed below. Be sure to read,
understand and follow these precautions.
SAFETY PRECAUTIONS
1) HOT PIPING - An engine and exhaust system may get extremely hot while
running. Do not work on a generator set until it has sufficiently cooled.
2) DANGEROUS FUELS - Use extreme caution when handling, storing and using fuels. All fuels
are highly explosive in a vaporous state. Store fuel in a well ventilated area away from spark
producing equipment. Keep fuels and all chemicals out of the reach of children. Never add fuel to
the tank while the engine is running. Spilled fuel may ignite on contact with hot parts or from
ignition spark. Always keep fuel lines and connections tight and in good condition. Don’t replace
flexible lines with rigid lines. If you notice any fuel leakage, fuel accumulation or electrical sparks,
DO NOT OPERATE THE GENERATOR SET.
3) EXPLOSIVE BATTERY GASES - The gases generated by a battery being charged are highly
explosive. Do not smoke or permit any flames or sparks to occur near a battery at any time,
especially when it is being charged. Avoid contact between terminals with tools to prevent sparks
and possible burns. Always remove wristwatch, rings, or other jewelry before handling a battery.
Any compartment containing batteries should be well ventilated to prevent the accumulation of
explosive gases. To avoid sparks never disturb the battery charging connections while the battery
is being charged. Always turn off the battery charger before disconnecting the terminal clips.
4) ELECTROCUTION
- Failure to install a generator set with an electrical system consistent
with governing regulations and standards is UNLAWFUL and may cause ELECTROCUTION.
Your generator set must not be used to “Back Feed” by connecting it to a building or outdoor
electrical circuit. Back feeding can cause serious injury or death to utility personnel working to
repair a power outage and may also seriously injure persons in your vehicle.
Unauthorized connections are unlawful in some states and/or localities. A transfer switch must be
installed to prevent interconnection of the generator set power and outside power.
5) MOVING PARTS
- Keep hands, feet, and clothing away from belts, fan and related pulleys
when unit is running. Replace guards, covers and screens before operating the generator set.
Serious personal injury may occur from contact with moving parts.
4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PT-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PT-3000 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info