____________________ WHAT POWER TECHNOLOGY WILL DO:
Power Tech will at our option, repair or replace any part covered by this warranty which becomes defective, malfunctions or otherwise fails to
conform to this warranty under normal use and service during the term of this warranty.
WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICE:
In order to obtain warranty repairs you must deliver the product, together with proof of purchase to an authorized Power Tech service facility. In
the case of repairs pertaining to the engine only, you must use an authorized dealer or distributor of that make of engine, to be covered under their
warranty. Engines used in the manufacture of Power Tech products are warranted solely by the engine manufacturer.
PRIOR APPROVAL IS REQUIRED FOR ANY WARRANTY SERVICE
Failure to obtain authorization prior to the repair being performed will result in the claim being denied.
All claims must be submitted within 30 days of the repair. Along with the following: a copy of the original repair order, Power Tech authorization
number, Power Tech serial number, and operation hours shown on the genset mounted hour meter.
THIS WARRANTY DOES NOT COVER THE FOLLOWING:
A. Normal wear items, including but not limited to: turbo-chargers, fuel injector (s), starter, alternator, and electronic components, as well as
normal engine and/or generator wear. A1. Travel time and fuel charges to and from the repair facility or travel time and fuel charges for mobile
service. (Except stationary units with a maximum of 2-hours travel time.) B. Defects, malfunctions or failure resulting from accidents, abuse,
misuse, improper servicing, improper installation, improper storage, and lack of performance of required maintenance service. C. Products which
have been subjected to alteration, modification, neglect or unauthorized repairs. D. Troubleshooting, routine service, tune-ups, replacement of
filters, belts, coolant, lubricants, hoses, clamps, exhaust system components, fuel system components, gaskets and/or seals. E. Electrical items
damaged by welding or jump-starting. F. Damage caused by water ingestion or electrolysis. G. Damage caused by ingestion of substances other
than clean filtered air, fuel, or intake water. H. Damage caused by faulty repairs performed by a repair facility not authorized in writing by Power
Tech. I. Damage caused by operation with improper fuel or at speeds, loads, conditions, modifications, or installation contrary to published
specifications or recommendations. J. Original installation charges and startup costs. K. Removal and re-installation charges of more than 1-hour
labor for outside units, 2-hours for compartment mounted units, and 3-hours for below deck marine units. Customer is responsible for additional
labor/charges due to difficult access, removal or installation. L.Starting batteries and labor or charges related to battery service. M. Loss of
revenue or the rental of equipment due to down time.N. Generator repairs made within the warranty period other than by an authorized Power
Tech service dealer without prior written approval from Power Tech warranty department. O. Damage caused by negligent maintenance such as
but not limited to: Failure to provide the specified type and quantity of lubricating oil, cooling air flow, and proper coolant mixture and level.
Failure to provide adequate air intake/or maintenance of the air intake system. Failure to provide scheduled maintenance as prescribed in supplied
manuals. P. Engine fluids such as fuel, oil or coolant/antifreeze. Q. Shop supplies such as adhesives, cleaning agents, rags, paint, or other
miscellaneous supplies. R. Use of other than factory supplied or approved repair parts or procedures. Replacement of a failed Power Tech
component with a non-Power Tech component voids the Power Tech warranty on that component and any and all failures related to that
component. S. Fuel injection pumps repaired by anyone other than the factory authorized dealer or distributor of that engine. T. Expenses
incurred investigating performance complaints unless defective Power Tech materials or workmanship are discovered. U. Generator sets used in
rental applications. V. Cleaning, service, or repair of generator sets the have not been kept free of dirt, debris, or other items that prevent the unit
from being able to operate properly. W. Any generator set not application approved. X. Loss of excitation due to prolonged storage. Y. Any
damage attributed to low battery monitoring or automatic generator starting systems. Z. Optional accessories are warranted solely by the
manufacturer of that item including but not limited to the following item: Block heaters, oil pan heaters, electric cooling fans, air-bag isolators,
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for PowerTech 20SI-T4F at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of PowerTech 20SI-T4F in the language / languages: English as an attachment in your email.
The manual is 1,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
