621128
20
Zoom out
Zoom in
Previous page
1/44
Next page
Disposal
The disposal instructions are based on icons placed on the
machine or its package. The description of the meanings can
be found in the “Marking“ section.
Transport package disposal
The package protects the machine against damage during
transport. Packing materials are usually chosen depending
on their environmental friendliness and disposal method and
can therefore be recycled. Returning the package to
material circulation saves raw materials and reduces waste
disposal costs. Parts of packages (e.g. foils, styropor®) can
be dangerous to children. Risk of suffocation! Keep parts
of the package away from children and dispose them as
soon as possible.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy
at our webpage www.guede.com in the Services section.
Please help us be able to assist you. To identify your
machine when claimed, we need to know its serial No., order
No, and year of production. All these details can be found on
the type label. Enter the details below for future reference.
Serial No.
Order No.
Year of production:
Tel. +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
Servicing
Switch the machine off and wait until it fully
stops before any servicing and cleaning.
Any servicing work not explicitly specified in this manual
must be performed by a professional as there may be
dangerous situations the operator is unable to handle. Spare
parts may only be replaced by a professional.
Cleaning
Whenever the machine is to be used, wash it thoroughly with
water, remove any grass and mud from inside. By this, you will
prevent dirt from getting dry inside the machine and problems
when starting the machine the next time.
Paint inside the cabinet may eventually wear away. To
prevent machine corrosion, apply anticorrosion coating to the
abraded spots.
Once or twice a year, remove the gear housing and use a
brush or compressed air to clean the space around the pulleys
and belts.
Once a season, you should clean the inside of the driving
wheels. Remove both wheels. Clean the cogwheels and their
edges off grass and other dirt using compressed air or a brush.
BLADE DISMANTLING
For the purpose of cleaning/treatment/change
Caution!!! Before dismantling, it is necessary to disconnect
the spark plug first.
Release the screw when dismantling the blade.
Put the components together again as shown in the picture.
Tighten the screws. Torque – 40 Nm. The screw should also be
changed when changing the blade.
CHANGING OIL
The oil drain plug is located under the engine. Prepare a
container to capture the oil and remove the oil plug. As soon
as all the oil has drained, fit a new plug with a washer and
wipe off any remaining oil.
Pour new SAE30 oil. Check the oil level using a clean
gauge. The oil level must be between Min and Max on the
gauge. Make sure the tank does not flow over.
Start the engine and let it run for a short time. Switch the
engine off again, wait for a minute and check the oil level.
Add oil if necessary.
Spark plug
As soon as the engine cools down, remove the spark plug
using a wrench included in the supply, clean it with a wire
brush and set the distance to 0.75 mm (0.030”) using a
feeler gauge. Refit the spark plug. Make sure the spark plug
is not tightened too much. (Alternatively: (Bosch WR 7 DC);
(NGK BPR 6 ES)
Oil drain plug
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powertec Garden BIG WHEELER 561 Trike 05163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powertec Garden BIG WHEELER 561 Trike 05163 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info