672630
5
Zoom out
Zoom in
Previous page
1/16
Next page
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 1 www.varo.com
1 APPLICATION .................................................................................. 3
2 OVERVIEW COMPONENTS (FIG. A).............................................. 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 GENERAL SAFETY RULES ............................................................ 5
5.1 Training.................................................................................................................... 5
5.2 Preparation .............................................................................................................. 6
5.3 Operation ................................................................................................................. 6
5.4 Maintenance and storage ....................................................................................... 7
6 SAFETY WARNINGS ....................................................................... 7
7 SAFETY WARNINGS GASOLINE ................................................... 8
8 ASSEMBLY ...................................................................................... 8
8.1 Folding handle (Fig. 1) ............................................................................................ 8
9 OPERATION ..................................................................................... 8
9.1 Before starting ........................................................................................................ 8
9.1.1 Add oil ....................................................................................................................... 8
9.1.2 Add gasoline (Fig. 2) ................................................................................................. 9
9.1.3 Charging the battery (Fig. 3) ..................................................................................... 9
9.1.4 Charge indicator (Fig. 4 a-b) ..................................................................................... 9
9.2 Starting the engine ................................................................................................ 10
9.2.1 Inserting the battery (Fig. 6) .................................................................................... 10
9.3 Stop engine ........................................................................................................... 10
9.4 Self-propelling function ........................................................................................ 10
9.5 Height adjustment instructions ............................................................................ 11
9.6 Rear cover position / grass expelling .................................................................. 11
9.7 Gras box warning system (Fig. 7) ........................................................................ 11
9.8 Mowing tips ........................................................................................................... 11
10 4 IN 1 .............................................................................................. 11
10.1 What is mulching .................................................................................................. 11
10.2 Different uses ........................................................................................................ 12
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 2 www.varo.com
10.2.1 Retrofitting for mulching mower (Fig. 8) .............................................................. 12
10.2.2 Resetting for side-discharge mowing (Fig. 9) ...................................................... 12
10.2.3 Mowing with the grass catch bag ........................................................................ 12
11 MAINTENANCE ............................................................................. 12
11.1 Changing / draining the oil. .................................................................................. 13
11.2 Draining the fuel tank (Fig. 10) ............................................................................. 13
11.3 Spark plug (Fig. 11) ............................................................................................... 13
11.4 To clean air filter (Fig. 12) ..................................................................................... 13
11.5 Cleaning the mower housing (Fig. 13) ................................................................. 13
11.6 Maintenance schedule .......................................................................................... 13
11.7 Battery storage ...................................................................................................... 14
12 TECHNICAL DATA ........................................................................ 14
13 STORAGE INSTRUCTIONS (OFF SEASON) ............................... 15
14 WARRANTY ................................................................................... 15
15 ENVIRONMENT ............................................................................. 16
15.1 Battery pack .......................................................................................................... 16
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 3 www.varo.com
SELF PROPELLED LAWN MOWER 163CC 460MM
POWXQG7540
1 APPLICATION
The purpose of this lawn mower is to cut grass. This lawn mower has been designed for
cutting grass areas in a domestic garden.
Not suitable for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 OVERVIEW COMPONENTS (FIG. A)
1. Push handle + soft grip
2. Brake lever
3. Drive lever
4. Starter key
5. Collect box
6. Collect box warning system
7. Fuel cap
8. Oil cap / dipstick
9. Wheel
10. Spark plug
11. Height adjusting lever
12. Side discharge flap
13. Air filter
14. Adjustable handle height
15. Muffler
16. Water nozzle
17. Battery
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x self propelled lawn mower 163cc 460
mm
1 x manual
1 x grass catch box
1 x spark plug wrench
1 x mulching block
1 x mulching knife
1 x battery
1 x charger
When parts are missing or damaged, please contact your dealer.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 4 www.varo.com
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
In accordance with essential
applicable safety standards
of European directives.
Read manual before use.
Switch the product off and
disconnect the spark plug
connector before assembly,
cleaning, adjustments,
maintenance, storage and
transportation.
Add engine oil
Check and refill oil.
This product produces
noxious exhaust fumes. If
the product is used
improperly, these fumes
can lead to poisoning, a
loss of consciousness or
death!
Only refuel unleaded petrol!
Switch the engine off while
you are refilling the tanks!
Risk of fire / flammable
materials
Hot surface, do not touch.
High temperatures on the
product’s surfaces and
structural parts that could
cause burns, if they are
touched. The product can
also stay hot for a longer
period of time after
operation!
Open flames in the work
area, around the product
and in the vicinity of
flammable materials are
prohibited!
Do not smoke in the work
area, around the product
and in the vicinity of
flammable materials!
Mandatory use of eye
protection.
Wear noise protection.
Wear gloves.
Wear respiratory protection.
Wear safety footwear.
Wear tight-fitted protective
clothes.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
Do not expose to rain or
wet conditions.
Mow across the face of
slopes, never up and down.
Inspect the area where the
product is to be used and
remove all objects which
can be thrown by the
product.
If objects are hidden while
operating stop the engine
and remove the object.
Keep hands and feet away
from sharp rotating parts
danger of injury! When
cleaning, repairing, or
inspecting, make certain the
cutting device and all
mowing parts have stopped.
Disconnect the spark plug
cap, and keep the cap away
from the plug to prevent
accidental starting.
Cutting device continues to
rotate after the product is
switched off. Wait until all
machine components have
completely stopped before
touching the product.
Pay special attention when
working on the cutting
device!
Objects thrown by the
product could hit the user
or other bystanders.
Always ensure that other
people and pets remain at
a safe distance from the
product when it is in
operation. In general,
children must not come
near the area where the
product is.
Guaranteed sound power
level value in dB
Warning: Keep the safety signs clear and visible on the equipment. Replace
the safety signs if they are missing or illegible.
5 GENERAL SAFETY RULES
WARNING: When using petrol tools, basic safety precautions, including the following, should
always be followed to reduce the risk of serious personal injury and/or damage to the unit.
Read all these instruction before operating this product and retain these instructions for future
reference.
WARNING: This machine produces an electromagnetic field during operation. This field may
under some circumstances interfere with active or passive medical implants. To reduce the
risk of serious or fatal injury, we recommend persons with medical implants to consult their
physician and the medical implant manufacturer before operating this machine.
5.1 Training
Read the instructions carefully. Be familiar with the controls and the proper use of the
equipment;
Never allow children or people unfamiliar with these instructions to use the lawn mower.
Local regulations can restrict the age of the operator;
Never mow while people, especially children, or pets are nearby;
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
The operators must receive proper training in the use, adjustment and operation of the
machine, including prohibited operations.
5.2 Preparation
While mowing, always wear substantial footwear and long trousers. Do not operate the
equipment when barefoot or wearing open sandals;
Thoroughly inspect the area where the equipment is to be used and remove all objects
which can be thrown by the machine;
WARNING: Petrol is highly flammable.
Store fuel in containers specifically designed for this purpose.
Refuel outdoors only and do not smoke while refuelling.
Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol
while the engine is running or when the engine is hot.
If petrol is spilled, do not attempt to start the engine but move the machine away from the
area of spillage and avoid creating any source of ignition until petrol vapours have
dissipated.
Replace all fuel tank and container caps securely.
Replace faulty silencers.
Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to
preserve balance.
5.3 Operation
Do not operate the engine in a confined space where dangerous carbon monoxide fumes
can collect.
Warning! Do not use the lawnmower when there is a risk for lighting.
It is recommended to limit the duration of operation, in order to minimize the risks from
noise and vibration.
Be careful when using the lawnmower in slopes and near drop-offs, ditches or
embankments.
Mow only in daylight or in good artificial light.
Avoid operating the equipment in wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
For wheeled rotary machines, mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
Use extreme caution when reversing or pulling the lawn mower towards you.
Stop the blade(s) if the lawn mower has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the lawn mower to and from the area to
be mowed.
Never operate the lawn mower with defective guards, or without safety devices, for
example deflectors and/or grass catchers, in place.
Caution: The lawnmower shall not be operated without either the entire grass catcher or
self-closing discharge opening guard in place.
Do not change the engine governor settings or overspeed the engine.
Do not alter or tamper with any sealed adjustment for the engine speed control.
The lawnmower safety systems or features shall not be tampered with or disabled.
Disengage all blade and drive clutches before starting the engine.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
Start the engine carefully according to instructions and with feet well away from the
blade(s).
Do not tilt the lawn mower when starting the engine.
Do not start the engine when standing in front of the discharge chute.
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening
at all times.
Never pick up or carry a lawn mower while the engine is running.
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have
come to a complete stop and, where a key is fitted remove the key:
Before clearing blockages or unclogging chute;
Before checking, cleaning or working on the lawn mower;
After striking a foreign object. Inspect the lawnmower for damage and make repairs before
restarting and operating the lawn mower;
If lawn mower starts to vibrate abnormally (check immediately);
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have
come to a complete stop and, where a key is fitted remove the key:
Whenever you leave the lawn mower;
Before refuelling;
Reduce the throttle setting during engine shut down and, if the engine is provided with a
shut-off valve, turn the fuel of at the conclusion of mowing.
Go slow when using a trailing seat.
5.4 Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
never store the equipment with petrol in the tank inside a building where fumes can reach
an open flame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol
storage area free of grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors.
Improper maintenance, use of non-conforming replacement components, or the removal
or modification of safety components can damage the lawnmower and injure the operators
seriously.
Only use the recommended blades and spare parts by the manufacturer. The use of non-
genuine parts can damage the machine and injure the operators. Keep the lawnmower in
good working condition.
If the blade stopping device doesn’t work, please contact service centre for help.
Warning: Do not touch rotating blade.
Warning: Refuel in a well ventilated area with the engine stopped.
6 SAFETY WARNINGS
Operate the lawn mower only with the grass box and/or the deflector plate installed.
Stop the engine before emptying the grass box or adjusting the cutting height.
Keep your hands and feet away from the area under the lawn mower or under the grass
discharge, while the engine is running.
Before mowing, clear the lawn of any foreign objects which could be thrown up by the
lawn mower.
Keep children, other persons and pets at a safe distance, while operating the lawn mower.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
Never tilt the lawn mower while starting it.
7 SAFETY WARNINGS GASOLINE
WARNING: Use extra care in handling fuels. They are flammable and the
vapours are explosive. The following points must be observed.
Use only an approved container.
Never remove the fuel cap or add fuel with the power source running. Allow engine
exhaust components to cool before refueling.
Do not smoke.
Never refuel the machine indoors.
Never store the machine or fuel containers inside, where is an open flame, such as a
water heater.
If fuel is spilled, do not attempt to start the power source, but move the machine away
from the area of spillage before starting.
Always replace and securely tighten the fuel cap after refueling.
If the tank is drained, this should be done outdoors.
8 ASSEMBLY
8.1 Folding handle (Fig. 1)
Fix the lower handlebars into the unit body with a suitable spanner. The nuts must always
point to the outside of the machine.
Release the upper handlebars for folding.
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
Raise handles until lower handle section locks into place in mowing position. Tighten all
bolts.
Remove protective padding, raise upper handle section into place on lower handle and
tighten both handle knobs.
Caution: Traction and starter cables must always be positioned on top of
the cross bar of the push handle. This provides free movement of the
cables on top of the lower section of the push handle, when the handle is
folded. Incorrect mounting of these cables could lead to damaging and/or
straining them, resulting in a malfunction of the machine. In this case the
guaranty is void.
9 OPERATION
9.1 Before starting
This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine
9.1.1 Add oil
Before each subsequent use the oil level must be checked and if necessary topped up with
approximately 470ml SAE30 engine oil.
CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the
muffler on startup.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
Be sure lawnmower is level.
Remove oil dipstick from oil fill spout.
Wipe the oil dipstick clean; refit and tighten teh oil tank cap and then remove it again. The
oil level must be within the marking and should be clear with gold colour.
Refill if the oil level is too low.
IMPORTANT:
Check oil level before each use. Add oil if needed. Fill to full line on dipstick.
Change the oil after every 25 hours of operation or each season. You may need to change
the oil more often under dusty, dirty conditions.
9.1.2 Add gasoline (Fig. 2)
WARNING: never fill fuel tank indoors, with engine running or until the
engine has been allowed to cool for at least 15 minutes after running.
Fill fuel tank to base of tank filler neck. Use fresh, clean, regular unleaded gasoline.
Do not overfill.
Do not mix oil with gasoline.
To assure fuel freshness, only purchase fuel in quantities that can be used within 30 days.
CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline
near an open flame
CAUTION: Alcohol blended fuels (called gasohol or using ethanol or
methan can attract moisture which leads to separation and formation of
acids during storage. Acidic gas can damage the fuel system of an engine
while in storage. To avoid engine problems, the fuel system should be
emptied before storage (See chapter Storage, further in this manual)
9.1.3 Charging the battery (Fig. 3)
Your lawn mower is powered by an electric start engine that is started using the supplied
Li-ion starter battery.
Use only the battery charger supplied with your tool. Only this type of battery chargers is
suitable for the lithium-Ion battery of your power tool. The battery is not charged when the
lawn mower is in operation.
Note: The battery is supplied partially charged. To obtain the full capacity of
the battery, fully charge the battery in the charger before the first use. The
lithium-ion battery can be charged at any time without reducing its service
life. Interrupting the charging procedure does not damage the battery.
After unpacking, remove the battery protection strip.
Press the check button (A) of the battery to check the charge status of the battery.
Connect the charger to the mains power supply. Insert the battery into the charger and, at
that moment, the red LED of the charger will light up.
We recommend that you fully charge the battery before the first use.
9.1.4 Charge indicator (Fig. 4 a-b)
The charger has two LEDs (red and green). The red LED is the power indicator. When the
charger is connected to the power socket and the battery is inserted into the charger, this
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 10 www.varo.com
LED will light up. Press on the battery pack to ensure that the battery contacts make good
contact with the charger. When everything is connected properly, the red LED will light
continuously, indicating that the battery is being charged.
When the battery is fully charged, the green light will be lit continuously and the red light
will go out.
Press both locking buttons (B) of the battery to remove the battery from the charger.
The charging time to fully charge the battery is one hour. You can also use a quick charge
function by inserting the battery into the charger for 10 minutes. Then you will be able to
start the machine up to 10 times. With a full battery, you can start the machine up to 50
times.
If the red light of the charger flashes, the temperature of the battery is too
high. First, let the battery cool down completely and then try to charge it
again (Fig. 5a).
When the red and the green light flash, the battery is defective and must be
replaced (Fig. 5b).
9.2 Starting the engine
9.2.1 Inserting the battery (Fig. 6)
When the battery is charged, slide it along the right side of the battery holder of the engine
until it clicks into place.
To remove the battery from the machine, press both locking buttons of the battery and pull
the battery along the right side out of the battery holder of the engine.
After inserting the charged battery, move the speed control lever to the highest position.
Stand behind the machine, grip the brake lever firmly and hold it pressed against the
upper part of the handle and then turn the starter key until the engine starts.
9.3 Stop engine
To stop engine, release the brake lever.
WARNING! The blade will continue to rotate for a few seconds after the
engine has stopped. Disconnect the spark plug cap if the lawnmower is to
be left unattended.
9.4 Self-propelling function
Self-propelling is controlled by holding the brake lever up to the handle and pushing the
drive control lever forward until it clicks.
Forward motion will stop when drive lever is released. To stop forward motion without
stopping engine, release the drive lever slightly until the drive control disengages. Hold
brake lever up against handle to continue mowing without self-propelling.
WARNING: The lawn mower immediately starts moving. To stop the
movement, release the brake lever (1). The lawn mower will then stop
immediately.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 11 www.varo.com
9.5 Height adjustment instructions
Caution: before changing mowing height, stop mower and disconnect spark
plug cable.
Your mower is equipped with a central height adjustment lever offering 8 height positions.
Stop mower and disconnect spark plug cable before changing mower cutting height.
To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down
to selected height.
All wheels will be in the same height of cut.
Medium position is best for most lawns.
9.6 Rear cover position / grass expelling
The rear cover can be used in 2 positions:
Cutting up and collected in the grass catcher
Cutting up and ejecting backwards
9.7 Gras box warning system (Fig. 7)
There is a warning piece in the grass catcher which will indicate the grass volume.
If the flap is open it means that there is still space for grass collection.
If the flap is closed it means that there is no space for grass collection.
9.8 Mowing tips
Under certain conditions, such as very tall grass, it may be necessary to raise the cutting
height to reduce resistance (prevent overload of the engine) and leaving clumps of grass
clippings. It may also be necessary to run the lawn mower over the area a second time.
For extremely heavy cutting, reduce the width of cut by over lapping previously cut paths
and mow slowly.
The pores in the cloth grass catcher can become blocked with dirt and dust and will collect
less grass. To prevent this, regularly hose down the grass catcher and let dry before re
using.
Keep the top of the engine (around the starter) clear and clean of grass clippings and
chaff. This will help engine air flow and extend engine life.
10 4 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
From lawn mower with rear discharge to, Mulching mower or as side-discharge mower.
10.1 What is mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
Regular cut-back by max. 2 cm from 6 cm to 4 cm grass height.
Use a sharp cutting knife
Do not mow wet grass
Set to max. motor speed
Only move at working pace
Regularly clean mulching wedge, housing inner side and mowing blade
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 12 www.varo.com
10.2 Different uses
10.2.1 Retrofitting for mulching mower (Fig. 8)
WARNING: only with a stopped motor and standstill cutter.
1. Raise the rear cover and remove the grass catch bag.
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the
opening on the deck.
3. Lower the rear cover again.
10.2.2 Resetting for side-discharge mowing (Fig. 9)
WARNING: only with a stopped motor and standstill cutter.
1. Lift the rear cover and remove the grass catch bag.
2. Mount the discharge channel.
3. Lift sideward flap for side discharge
4. Mount the discharge guide for side discharge on the support pin of the sideward flap.
5. Lower the sideward flap- the flap lies on the discharge channel.
10.2.3 Mowing with the grass catch bag
WARNING: only with a stopped motor and standstill cutter.
1. For mowing with the grass catch bag, remove the mulching wedge and discharge
channel for side discharge and mount the grass catch bag.
2. Removing the mulching wedge.
Lift rear cover and remove the mulching wedge.
Removing the discharge guide for side discharge:
3. Lift sideward flap and remove discharge channel.
The sideward flap automatically closes the discharge opening on the housing by mean of
spring force.
Regularly clean the sideward flap and discharge opening form grass rest and stuck dirt.
11 MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the
safety level and original performance of the machine unchanged in time.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Regular maintenance is essential for safety and performance.
Never store the equipment with fuel in the tank inside a building where fumes can reach
an open flame, a spark or a source of extreme heat.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine; exhaust silencer, battery compartment and
petrol storage area free of grass, leaves, or excessive grease. Do not leave containers
with grass cuttings in doors.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 13 www.varo.com
Replace worn or damaged parts for safety. For reasons of safety, do not use the
equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts
that are not of the same quality can damage the equipment and be dangerous for your
safety.
If the fuel tank has to be drained, this should be done outdoors and when the engine is
cool.
Wear strong work gloves when removing and reassembling the blade.
Check the blade's balance after sharpening.
Check the self-closing guard and grass-catcher frequently for wear and deterioration.
Whenever the machine is to be handled, transported or tilted you must:
wear strong working gloves;
grasp the machine at the points that offer a safe grip, taking account of the weight and its
distribution.
11.1 Changing / draining the oil.
Remove the oil dipstick, remove the oil with the oil extractor, refill engine with approximately
470ml SAE30 engine oil.
Start the engine and allow it to run briefly. Stop the engine, wait one minute and check the oil
level. Top up if necessary.
11.2 Draining the fuel tank (Fig. 10)
Unscrew and remove the fuel tank cap and use a proper fuel pump to empty the fuel into a
suitable container
11.3 Spark plug (Fig. 11)
Allow the engine to cool down.
Remove the spark plug using the box spanner supplied, clean the plug with a wire brush. Set
the gap to 0.75 mm ( 0.030") using a feeler gauge.
Refit the spark plug taking care not to overtighten it.
Use only correct type spark plug. For best results, replace the spark plug every 100 hours of
use.
11.4 To clean air filter (Fig. 12)
Unclip the air filter cover and remove the sponge filter element. (To avoid objects falling
into the air intake, replace the air filter cover).
11.5 Cleaning the mower housing (Fig. 13)
Dirt deposits make the start difficult, affect the quality of the cut and the discharge of the grass.
Dirt and grass residues are easiest to remove immediately after the mowing. To avoid fouling
the floor, the underside must be cleaned on the grass.
Remove the mulching plug / grass catcher.
Fit the hose connector to the lawn mower and turn on the water tap.
Start the lawn mower and switch it off again after about 30 seconds. The rotating blade
bar will throw the water onto the underside of the lawn mower and thus clean it.
Turn off the water tap and remove the hose connector.
Clean the top with a cloth (do not use any sharp objects).
11.6 Maintenance schedule
Before
Each
Use
First
Month
or
5 Hrs
Every 3
Months
or
25 Hrs
Every 6
Months
or
50 Hrs
Every
Year
or
100
Hrs
Every
Two
Years
or 250
Hrs
Engine oil
Check
X
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 14 www.varo.com
Replace
X
x (1)
Air cleaner
Check
X
clean(2)
clean(2)
Replace
X
Spark plug
Check/adjust
X
Replace
X
Flywheel
brake pad (A
types)
Check
X
Fuel tank and
filter
Clean
X (3)
Fuel tube
Check
Every 2 years (Replace if necessary) (3)
Valve
clearance
Check-adjust
X (3)
Combustion
chamber
Clean
After every 200 hours (3)
(1) Service more frequently when used in a dusty areas.
(2) Change oil every 25 hours when used with heavy load or in high ambient temperatures.
(3) These items should be serviced by a technician.
(4) For commercial use, record hours of operation to determine proper maintenance intervals.
11.7 Battery storage
Remove the battery from the machine if you do not use it for a lengthy period of time (winter
season).
Fully charge the battery at the beginning of the mowing season.
Keep the battery in a frost-free place (the ideal temperature is 20 °C).
12 TECHNICAL DATA
Model
POWXQG7540
Cylinder capacity
163 cc
Engine power
2,59 kW@2800min-1
Engine type
B&S 4-stroke
Rotation speed
Max 2900 min
-1
Cutting width
460 mm
Weight
32,6kg
Collect box/ bag
60 L
Cutting Height
24-73mm
Number of height positions
8
Self propelled
Yes
Oil tank capacity
0.47 l
Fuel tank capacity
1 l
Diameter front wheel
175mm
Diameter rear wheel
250mm
Crank engine
Yes
Central Adjustable height setting
Yes
Spark Plug Type
Champion
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 15 www.varo.com
Ball bearing wheels
Yes
Ready start engine
No
Front carrying handle
No
Foldable handle
Yes
E10 fuel proof
Yes
4 Functions
Side discharge
Mulching function
Rear discharge
Collection
13 STORAGE INSTRUCTIONS (OFF SEASON)
To avoid engine problems, the fuel system should be emptied before storage of 30 days or
longer.
Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty.
Use fresh fuel next season.
Never use engine or carburetor cleaner products in the fuel tank or permanent damage may
occur.
The following steps should be taken to prepare lawn mower for storage.
Following the final cut of the season allow the fuel tank to run dry.
Clean and lubricate mower thoroughly as described in the lubrication instructions.
Refer to engine manual for correct engine storage instructions.
Lightly coat mower's cutting blade with environmental safe chassis grease to prevent
rusting.
Store mower in a dry, clean area.
NOTE:
When storing any type of power equipment in an unventilated or material storage shed, -
Care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the
equipment, especially cables and all moving parts.
Be careful not to bend or kink cables.
If the starter rope becomes disconnected from rope guide on handle, disconnect and
ground the spark plug wire. Grasp the start/stop handle of the engine and pull the starter
14 WARRANTY
This product is warranted for a 5-year period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
POWXQG7540 EN
Copyright © 2017 VARO P a g e | 16 www.varo.com
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
15 ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it with the
household rubbish but dispose of it in an environmentally safe way.
Please dispose of used motor oil in a manner that is compatible with the environment. We
suggest you take it in a sealed container to your local service station for reclamation. Do not
throw it in the trash or pour it on the ground.
15.1 Battery pack
This product contains Li-ion. To preserve natural resources, please recycle or dispose of
batteries properly. Local, state or federal laws may prohibit disposal of Li-ion batteries in
ordinary trash. Consult you local waste authority for information regarding available recycling
and/or disposal options.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQG7540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQG7540 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQG7540

Powerplus POWXQG7540 User Manual - German - 18 pages

Powerplus POWXQG7540 User Manual - Dutch - 17 pages

Powerplus POWXQG7540 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info