481025
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWXQ6104/POWXQ6110
EN
Copyright © 2011 VARO NV
P a g e | 8
www.varo.com
8 INSTRUCTIONS FOR USE
Always observe the safety instructions and applicable regulations.
Use only one hand to hold the tool. Do not place your other hand over the air vents.
Prior to operation:
Mount the correct accessory for the application.
Set the desired air temperature.
8.1 Switching on and off
To switch the tool on, set the on/off switch to position: POWXQ6104: 1 / 2 or 3 -
POWXQ6110: 1 or 2. Some smoke may be emitted after switching on; this does not
indicate a problem.
To switch the tool off, set the on/off switch to position: 1 (which is the cool-down position /
set the tool at the lowest air temperature and max. air flow to cool off). Then set the on/off
switch to position 0. Let the tool cool down before moving or storing it.
Inrush currents can cause short-time voltage drops; under unfavourable power supply
conditions, other equipment may be affected (if the system impedance of the power supply is
lower than 0,127 + j0,079 Ohm, disturbances are unlikely to occur); if you need further
clarification, you may contact your local power supplier.
8.2 Temperature setting
8.2.1 POWXQ6104:
Slide ON/OFF switch to 1, 2 or 3 depending on temperature you need. The heat gun will start
to buzz.
8.2.2 POWXQ6110:
Slide ON/OFF switch to 1 or 2, depending on temperature you need. The heat gun will start to
buzz. Now you can increase or decrease the outlet temperature and air flow gradually by
pressing the buttons (4). The LCD will display the temperature in digits and air flow in ladder
pattern. Temperature in digits increase or decrease by every 10°C.
8.3 Stripping paint
Mount an appropriate accessory.
Set a high air temperature.
Switch the tool on.
Direct the hot air onto the paint to be removed.
When the paint softens, scrape the paint away using a hand scraper.
Do not strip metal window frames, as the heat may be conducted onto the
glass and crack it. When stripping other window frames, use the glass
protection nozzle.
Do not keep the tool directed at one spot too long to prevent igniting the
surface.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ6104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ6104 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ6104

Powerplus POWXQ6104 User Manual - German - 12 pages

Powerplus POWXQ6104 User Manual - Dutch - 11 pages

Powerplus POWXQ6104 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info