481029
18
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5350 EN
Copyright © 2014 VARO P a g e | 18 www.varo.com
Clean the surfaces of the following components:
o The saw shaft
o The inner saw flange
o The saw blade
o The outer saw flange
o Adapter ring
o The saw blade guard
HAZARD! Do not use any cleaning products (for instance for removing
resin residues) that have the tendency to cause corrosion on light metals;
this could damage the machine.
Put the inner saw flange and the adapter ring on the saw shaft.
HAZARD! Be sure to fasten the inner saw flange correctly! The saw may
block, or the saw blade may come lose, if the flange is not correctly
fastened.
Mount the new saw blade and check the rotating direction (the arrow on the saw blade
must point in the same direction as the arrow on the saw blade guard!).
HAZARD! Only use saw blades that conform to the applicable standards
and that can be used at the maximum speed indicated in the technical data
sheet.
DO NOT use:
o Wrong saw blades
o Saw blades made of high-speed steel (HSS)
o Damaged saw blades
o Saw blades with missing teeth
HAZARD!
Only use OEM components for installing the saw blade.
o Do not use loose reduction rings; the saw blade could come loose.
o Saw blades must be mounted in such a way that they cannot wobble, and that they
cannot come loose during operations.
Install the outer saw flange.
The two flanges must fit over the surfaces of the saw shaft.
Insert the shaft bolt (left-turning thread) and tighten with a hexagonal spanner.
HAZARD!
Do not lengthen the spanner, so that you can exercise more power.
Do not hit on the spanner with a hammer, for tightening the shaft.
The spanner must be removed, after the shaft that has been tightened.
Install the saw table and mount the corresponding screws.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5350 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5350

Powerplus POWXQ5350 User Manual - German - 23 pages

Powerplus POWXQ5350 User Manual - Dutch - 23 pages

Powerplus POWXQ5350 User Manual - French - 22 pages

Powerplus POWXQ5350 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info