753356
9
Zoom out
Zoom in
Previous page
1/13
Next page
POWXG9100 EN
Copyright © 2021 VARO NV Page | 9 www.varo.com
11.4.4 40° nozzle (coloured white)
This nozzle delivers a 40 degree spray pattern and a less powerful stream of water. It covers a
wide area of cleaning. this nozzle should be used for most general cleaning jobs.
11.4.5 Low pressure nozzle (coloured black)
This nozzle is used to apply chemicals or cleaning solutions. It has the least power stream.
Note:
Due to material and workmanship differences high pressure streams can damage patio paving
slabs. Try on a small test area first. If necessary adjust the pressure by changing nozzles or
slowing down the engine speed
11.5 Connect the nozzle (Fig. 15)
Connect the nozzle to the lance using the quick release connector this allows the quick and
easy changing of nozzles. To connect a nozzle slide the collar back towards the gun, push the
nozzle into the end of the lance. Release the collar to lock the nozzle into position. To
disconnect a nozzle slide the collar back towards the gun, the nozzle can now be removed.
Note: please be sure that you crosscheck the correct connection of the nozzle.
Warning: the nozzle is not properly fixed when the collar doesn’t slide back. Push the nozzle
with high force into the opening, otherwise the collar doesn’t slide back by itself and the nozzle
is shot out
11.6 Using the detergent facility
Rinse surface with cool water before applying cleaner.
Prepare detergent as required by job.
Remove cap from detergent container and fill.
Spray detergent on surface. For best result use long, even, and overlapping strokes.
Allow detergent to set for about 3 minutes before sensing, but do not allow detergent to
dry on surface or it may cause streaking or cause damage to the surface.
To clean equipment after use, flush water through the spray nozzle for 1-2 minutes then
shut off the machine. Soak nozzle in a bucket of clean water to remove detergent.
11.7 Self-priming from open tanks/containers and natural water (Fig. 16)
Self-priming, allows the suction of water from containers and natural sources. It is
IMPORTANT that the filter on the water inlet is cleaned and in place, and that only clean water
is sucked in.
With this accessory the appliance can draw water to max. 1 m above the water surface. This
can take up to 1 minute.
Immerse the 2 m suction hose completely under water to get the air out.
Connect the suction hose to the appliance and ensure that the intake filter remains under
water.
Run the appliance without the hand spray gun attached until water flows evenly out of the
high-pressure hose.
If no water flows out after 1 minute, switch the appliance off and check the appliance. Once
the water flows, switch off the appliance and attach the hand spray gun and the jet pipe so you
can work.
It is important that the hose and coupling are of a good quality, tightly fitted and that the seals
are undamaged and inserted straight. Leaky connections can impair the suction.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG9100 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG9100

Powerplus POWXG9100 User Manual - German - 15 pages

Powerplus POWXG9100 User Manual - Dutch - 14 pages

Powerplus POWXG9100 User Manual - French - 15 pages

Powerplus POWXG9100 Additional guide - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info