672544
9
Zoom out
Zoom in
Previous page
1/9
Next page
POWXG90420 EN
Copyright © 2018 VARO P a g e | 9 www.varo.com
Should the machine by mistake be frozen, it will be necessary to check it for damage.
WARNING: Never start up a frozen machine. Frost damages are not covered
by the guarantee!
11 TROUBLE SHOOTING
SYMPTOM
CAUSE
RECOMMENDED ACTION
Machine refuses
to start
Machine not plugged
in
Plug in machine.
Defective socket
Try another socket.
Defective extension
cable
Try without the extension cable.
Fluctuating
pressure
Pump is sucking air
Check that hoses and connections are
airtight.
Valves dirty, worn out
or stuck
Contact your nearest service centre.
Water supply not
sufficient
Increase water pressure, check for
blockage of garden hose and/or change to
bigger hose.
Pump seals worn
Contact your nearest service centre.
Machine stops
Incorrect mains
voltage
Check that the mains voltage corresponds
to specification on the name plate.
Thermal sensor
activated
Leave the machine for 5 minutes to cool
down.
Nozzle partially
blocked
Clean the nozzle with a needle and by
spraying water backwards through the
nozzle.
Amperage increase
Try without the extension cable.
Machine
pulsating
Air in inlet hose/pump
Allow machine to run with open trigger until
regular working pressure resumes.
Inadequate supply of
mains water
Increase water pressure, check for
blockage of garden hose and/or change to
bigger hose.
Nozzle partially
blocked
Clean the nozzle with a needle and by
spraying water backwards through the
nozzle.
Water filter blocked
Clean the filter.
Hose kinked
Straighten out hose.
Machine often
starts and stops
by itself
Pump and/or trigger
gun is leaking
Contact your nearest service centre.
No water supply
Connect inlet water.
Machine starts
but no water
comes out
Water filter blocked
Clean the filter.
Nozzle blocked
Clean the nozzle with a needle and by
spraying water backwards through the
nozzle.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

powerplus-powxg90420

Reset search

  • Hi
    what is the water outlet on the quick release connector. Make and size please Submitted on 7-1-2021 at 01:33

    Reply Report abuse
  • Hi
    Anybody have trouble with detergent dispenser as mine not working feel like no suction on it have tried all previous things any tips? Submitted on 7-8-2020 at 18:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG90420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG90420 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG90420

Powerplus POWXG90420 User Manual - German - 10 pages

Powerplus POWXG90420 User Manual - Dutch - 10 pages

Powerplus POWXG90420 User Manual - French - 10 pages

Powerplus POWXG90420 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info