Manual Powerplus POWXG9030 (page 7 of 13) (English)

480875

Zoom out

Zoom in

1/13

POWXG9030 EN

6.2 Water connection

 Connection to the public mains according to regulations.

 Inlet hose can be connected to the water mains with a max. inlet pressure of 10 bars.

This high pressure washer is in Europe only allowed to be connected with the

drinking water mains, when an appropriate mains backflow preventer has

been installed, Type BA according to EN 1717. The length of the hose

between the backflow preventer and the high pressure washer must be at

least 10 metres to absorb possible pressure peaks (min diameter ½ inch).

 Operation by suction (for example from a rainwater vessel) is carried out without backflow

preventer.

 As soon as water has flown through the BA valve, this water is not considered to be

drinking water any more.

IMPORTANT! Only use water without any impurities. If there is a risk of

sand particles in the inlet water (i.e. from your own well), an additional filter

should be mounted.

6.3 Safety devices

 The unloader valve can reduce pressure if it exceeds pre-set values.

 Locking device on trigger gun (12): The trigger gun (11) features a locking device (12).

When the knob is activated, the trigger gun (11) cannot be operated.

 A thermal sensor protects the motor against overloading. The machine will restart after a

few minutes when the thermal sensor has cooled.

7 ASSEMBLY

This section will explain in details how to make you high pressure washer ready for use.

7.1 Mounting of foot and wheels (Fig. 1)

1. Fix the foot under the machine. Secure the foot with the 4 screws

2. Click the wheels into the machine

7.2 Mounting of storage hook (Fig.2)

Slide the storage hook into the holder.

7.3 Mounting of Patio Cleaner (Fig. 3)

1. Insert the extension lance into to the housing

2. Fix the extension lance with the two screws to the housing

3. Insert the rotor arm into the extension lance

4. Insert the U-pin to fix the rotor arm. NOTE: Make sure the rotor arm is properly fixed to

the extension lance with the U-pin

8 OPERATION

8.1 Connection of garden hose (Fig. 4)

1. Screw the water inlet coupling tight on to the water inlet Note: The inlet filter (A) must

always be fitted in the water inlet pipe to filter out sand, lime stone and other impurities as

these will damage the pump valves. Caution: Failure to fit the filter will invalidate the

guarantee.

2. Connect the garden hose with a standard quick coupling

8.2 Mounting of high pressure hose (Fig. 5)

1. Attach the high pressure hose to the trigger gun and machine.

2. Detach the high pressure hose by pressing the pawl (A) or button (B)

Water is leaking from the elbow attached to the reel. Does it need to be replaced and if so how do I detach it from the hose? Submitted on 27-8-2022 at 11:24
Reply Report abuse
Water is leaking from the plastic elbow on the reel. Does the elbow need replacing and how do I remove the elbow from the reel ? Submitted on 27-8-2022 at 11:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG9030 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG9030

Powerplus POWXG9030 User Manual - German - 16 pages

Powerplus POWXG9030 User Manual - Dutch - 15 pages

Powerplus POWXG9030 User Manual - French - 14 pages

Powerplus POWXG9030 Additional guide - All languages - 3 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWXG9030 Manual

Product: