POWXG7214 EN
Copyright © 2019 VARO NV P a g e | 8 www.varo.com
10 OPERATING INSTRUCTIONS
10.1 Pre- First - Start Inspection
IMPORTANT! Engine is shipped from factory without oil. Engine oil must be
added before starting engine. SAE10W-30.
▪ Make sure all safety guards are in place and all nuts and bolts are secure.
▪ Check oil level in engine crankcase.
▪ Inspect air filter for cleanliness.
▪ Check the fuel supply. Do not fill petrol tank completely, allow space for fuel to expand.
▪ Be sure spark plug wire is attached and spark plug is tightened securely.
▪ Check depth regulator lever position.
▪ Examine underneath and around engine for signs of oil or fuel leaks.
▪ Inspect fuel hoses for tightness and fuel.
▪ Look for signs of engine damage.
▪ Remove excessive debris from silencer area and recoil starter
10.1.1 Starting the engine
▪ Open the fuel locking knob to the “ ”position. (Fig. 11A)
▪ When starting cool engine, turn throttle choke lever to “ ” position,
▪ When starting warm engine and operating, turn throttle chock lever to “ ”position. (Fig.
11C)
▪ Standing behind the unit, pull the starter rope lightly until you feel resistance then pull
briskly.
▪ Return the starter rope gently.
▪ When you finish the job of mowing each time, please turn the fuel cock to the” ”
position. (Fig. 11B)
10.2 Tilling
▪ Pull the front wheel support downward and move to the slot. (Fig.12B/15C)
▪ Start the engine as above. Let the engine run a few minutes to warm before use.
▪ Press the lock button (1) and meanwhile press down the clutch handle (2) and keep it in
grasp, the blade will rotating and the machine will move forward. (Fig. 12A)
▪ Release the clutch handle to stop the machine.
▪ Press the lock button (1) and Press down the reverse handle (2) and keep it in grasp,
the blade will reverse rotating and the machine will reverse automatically. (Fig. 12D)
▪ Release the reverse handle to stop the machine.
Do not operate both “forward” and “reverse” clutch levers at the same time.