582107
7
Zoom out
Zoom in
Previous page
1/11
Next page
POWXG6490 EN
Copyright © 2014 VARO NV P a g e | 7 www.varo.com
6 ASSEMBLY
6.1 Preparing the Log Splitter for Use
Carefully remove the log splitter from its packaging and place it on the accompanying
Styrofoam block so that the wheels and foot can be mounted.
Careful: Not placing the log splitter on the block can cause damage to the
motor’s ventilation cap or the motor casing itself.
Before using the log splitter, the foot at the front of the machine must be mounted and
fastened with the proper screws and bolts. Next, mount the wheels on their axel. Place the
wheel on the axel, and fasten it with a washer. Never use the log splitter if it is not in perfect
operating condition or if it needs service.
Familiarize yourself with the instruction manual and its operating and safety mechanisms, as
well as the log splitter’s functions before using the machine for the first time.
6.2 Bleed screw
On the back of the machine is a bleed screw (#14) that must be
loosened 3 to 4 rotations before the log splitter may be used for
the first time. When moving the log splitter, the screw must be
tightened again to avoid oil leakage
7 OPERATION
Place the log splitter on a table that is 60-75 cm high.
Connect the electric log splitter to 230 Volt power supply.
When using an extension cord, keep it away from the wood-splitting wedge or places
where it could be damaged or torn.
Place the log on the push plate. The push plate ensures that the log is positioned correctly
in relation to the wedge. If the log is not steady, try turning it over.
Press the ON/OFF button (6) of the motor with your right hand and activate the operating
handle (3) with your left. Push the push plate forwards to split the log.
Caution: if the switch is not fully depressed the switch contacts may burn
in.
If the log does not split at once do not keep the cylinder depressed. Draw the push plate
back and try again. A small piece of wood can be difficult to split when it is somewhat
knotty. Logs with a uniform structure are easy to split even when large. When the wood is
too hard do not use this machine as damage to the motor may occur.
Repeat the process for short sawed pieces of wood.
When you have finished you work, pull the plug from the socket, but do not yank on the
cord.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG6490 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG6490 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG6490

Powerplus POWXG6490 User Manual - German - 13 pages

Powerplus POWXG6490 User Manual - Dutch - 12 pages

Powerplus POWXG6490 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info