725416
14
Zoom out
Zoom in
Previous page
1/16
Next page
POWXG6461 EN
Copyright © 2019 VARO P a g e | 14 www.varo.com
WARNING! Never use a high-pressure washer or running water when
cleaning the shredder! Brush away dirt and plant residue which may be
caught in the spiral cutter. Wipe clean the outside of the shredder with a
cloth which has been moistened with a mild detergent and water.
13 STORAGE
To protect the shredder from corrosion when storing for a longer period, treat the cutting blade
with environmentally-friendly oil.
14 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
The motor does not
run
Collection box not inserted
correctly /- safety handle not
moved up to close safety switch
Place collect box under machine and
close safety switch by pushing safety
handle upwards.
Power failure
Check the power supply cable, the
plug and the house fuse.
Overload protection is activated
Wait until the machine cools down
and press the green button.
Motor makes sound
but does not
function
Cutting roller is blocked
Turn off the device. Switch the
forward/reverse switch into reverse
directiona and switch on the machine
until the jam has been cleared.
Switch the machine off again and
turn back to forward rotation.
Capacitor fault
Bring machine to authorised service
center for repairing.
The material to be
chopped is not
drawn in
The cutting blade is running
backwards.
Switch over the direction of rotation.
The material is jammed in the
feeding funnel
Switch the shredder OFF.
Pull the material from the feed
funnel. Switch the shredder back ON
and re-feed thick branches such that
the blade does not immediately
engage the pre-cut notches again.
Shredding material is too soft
Insert wood or shred dried branches
The cutting blade is blocked.
Press the rotational switch in the
reverse position. The cutting blade
will now run backwards to release
the blocked up material.
Note : If blocked material is still not
released, you can enlarge the
distance between anvil and drum
knife.
Cutting roller worn
Readjust the anvil / drum knife
distance.
If the cutting roller is severely worn,
replace it.
Shredding material
comes out in chains
Anvil is incorrectly adjusted
Readjust the anvil / drum knife
distance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG6461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG6461 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG6461

Powerplus POWXG6461 User Manual - German - 18 pages

Powerplus POWXG6461 User Manual - Dutch - 17 pages

Powerplus POWXG6461 User Manual - French - 17 pages

Powerplus POWXG6461 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info