POWXG50300 EN
Copyright © 2019 VARO P a g e | 8 www.varo.com
▪ Check that the machine is not damaged. Repair any damage.
▪ If anything jams in the blades while you are working, switch off the engine and wait until it
has stopped completely before cleaning the blades.
▪ Disconnect the HT lead from the spark plug.
▪ The transport guard should always be fitted to the cutting attachment when the machine is
not in use.
▪ Make sure the cutting attachment has stopped before cleaning, carrying out repairs or an
inspection. Disconnect the HT lead from the spark plug.
▪ Always wear heavy-duty gloves when repairing the cutting attachment. This is extremely
sharp and can easily cause personal injury.
▪ Store the machine out of reach of children.
▪ Use only original spare parts for repairs.
▪ Work with a swinging action from the bottom upwards when trimming sides.
▪ Adjust the throttle setting to suit the load.
▪ When trimming the hedge, the engine should always face away from the hedge.
▪ Hold the machine as close to your body as possible to get the best balance.
▪ Make sure the tip does not touch the ground.
DO NOT rush the work but work steadily until all the branches have been cut
back clearly.
▪ The hedge trimmers’ rear handle can be set to three different positions by pressing down
on the Rotary Handle Lock Button. (Fig. 2)
▪ To adjust the handle angle you MUST switch the machine off BEFORE adjusting.
▪ While working, the handle should always be facing upwards irrespective of how the hedge
trimmer is directed.
11 CLEANING AND MAINTENANCE
WARNING! Before cleaning, inspecting or repairing your unit, you MUST
make sure that the engine has stopped and allowed to cool. You MUST
disconnect the spark plug HT lead cap to prevent any accidental starting.
CAUTION! ALWAYS refuel in a well-ventilated area with the engine off and
the spark plug HT cap removed. Whilst carrying out maintenance you MUST
wear appropriate Personal Protective Equipment (PPE). Suggested PPE
Sturdy footwear, work gloves, long trousers and hearing protection.
NOTE: Spare parts – If a part needs replacement, you MUST only use parts
that meet the manufacturer’s part number specifications. Replacement parts
that DO NOT meet specifications may result in a safety hazard or poor
operation of the generator and will VOID the warranty. Major servicing
including installation or replacement parts, should be made by a qualified
service technician.
