Manual Powerplus POWXG50200 (page 6 of 15) (English)

700216

Zoom out

Zoom in

1/15

POWXG50200 EN

8 ASSEMBLY

WARNING! To prevent an accidental start that could cause serious personal

injury, always disconnect the engine spark plug HT lead from the spark

plug when assembling parts.

WARNING! Never install, remove or adjust any attachments while power

head is running. Failure to stop the engine can cause serious personal

injury.

▪ Unscrew the locknut (7) from the shaft by turning it clockwise.

▪ Remove the floating disc (6) and washer (5).

▪ Insert the allen key (1) through the hole in the head assembly and into the opening on the

mounting disc (3).

▪ Hold the allen key tight so the mounting disc does not move.

▪ Install the blade (4), washer (5), concave to be upwards and the floating disc (6).

NOTE: The pit side of the washer must be connected with the blade.

▪ Screw down the locknut (7) and tighten it anti-clockwise by holding the allen key.

▪ Remove the Allen key and check for free movement of the blade.

▪ Remove the screw from the cutting head guard.

▪ Insert the left tab into the slot on the cutting head guard.

▪ Align the screw hole in the mounting bracket with the screw hole into the cutting head

guard.

▪ Tighten the screw through the mounting bracket and into the cutting head guard using the

screwdriver provided.

▪ Lay the machine horizontally then fix the bottom of the handlebar bracket with the 2

M5x40 screws attached to the mounting bracket.

▪ Insert the right handle in to the bracket, insert the left handle into the bracket.

NOTE: Ensure the left handle goes in the left side and right handle in the

right side. Do not mix them up.

▪ Install the mounting bracket cover and tighten the 6 screws until the handle is secure.

▪ Connect the latch on the shoulder harness to the strap hangar. Adjust the strap to a

comfortable working position.

9 PRE OPERATION CHECKS

WARNING! This machine is shipped without oil and fuel. You MUST ensure

all fluid levels are correct before operation otherwise you may cause

serious engine damage that will not be covered by the warranty.

WARNING! ALWAYS use a semi-synthetic 4 stroke SAE 10W30 engine oil

and straight unleaded petrol.

DO NOT mix the fuel with the oil.

You MUST check the engine oil level before each use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG50200 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG50200

Powerplus POWXG50200 User Manual - German - 16 pages

Powerplus POWXG50200 User Manual - Dutch - 16 pages

Powerplus POWXG50200 User Manual - French - 16 pages

Powerplus POWXG50200 Additional guide - All languages - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWXG50200 Manual

Product: