582083
7
Zoom out
Zoom in
Previous page
1/15
Next page
POWXG3016 EN
Copyright © 2015 VARO P a g e | 7 www.varo.com
8 ASSEMBLY
8.1 Bike handle installation (Fig. 1)
Install the U-handle on the fixing holder, install the clamp and fasten with the screws.
8.2 Installation protection guard (Fig. 2)
Remove the 2 screws from the guard.
Position the guard so it can be fixed into place with the clamp and the screws.
Tighten the screws.
8.3 Installing the harness (Fig. 3)
Adjust the harness hanger in a comfortable position.
Buckle the harness at the hanger.
8.4 Replace the metal blade to spool
CAUTION: NEVER use unit if blade is warped or has teeth that are chipped or
missing. Replace a damaged blade immediately.
CAUTION: Always wear heavy-duty work gloves when handling and installing
a blade.
8.4.1 Disassembly metal blade
Align the hole on the gear box to the slot on the flange washer
Use the pin to go through the hole and slot, and hold the flange washer
Loose the nut and remove the metal blade and cup washer
8.4.2 Assembly spool (Fig. 4)
Install the flange washer and cup washer on the spindle shaft.
Install the spool and tighten it.
STOP ENGINE IMMEDIATELY!
Excessive vibration of blade means that it is not properly installed-stop
engine immediately and check blade. Blade not properly installed will cause
injury.
9 FUEL AND LUBRICATION
9.1 Fuel
Use regular grade unleaded petrol mixed with 40:1 custom 2-cycle engine oil for best results.
Use mixing ratios in Section FUEL MIXING TABLE below.
WARNING: Never use normal petrol in your unit. This will cause permanent
engine damage and void the manufacturer’s warranty for the product. Never
use a fuel mixture that has been stored for over 90 days.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3016 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3016

Powerplus POWXG3016 User Manual - German - 17 pages

Powerplus POWXG3016 User Manual - Dutch - 16 pages

Powerplus POWXG3016 User Manual - French - 17 pages

Powerplus POWXG3016 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info