POWXG2042 EN
Copyright © 2020 VARO P a g e | 7 www.varo.com
8 CUTTING TIPS
▪ Assume a secure position, using two hands to hold the trimmer and switch on.
▪ Trim both sides of the hedge, starting at the bottom. This prevents cuttings falling into the
area yet to be cut.
▪ Pass the blade lightly through the surface of the hedge. Do not attempt to cut too deep.
▪ Trim the top of the hedge.
▪ For older hedges that require cutting back substantially, use pruning shears to cut the
thicker branches and then finish the job with the hedge trimmer.
▪ Never use the hedge trimmer without check the tightness of the bracket.
9 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, pull the power plug.
▪ Check your machine regularly before starting the work.
▪ Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
▪ After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
▪ Always keep the ventilation slots in motor housing clean
▪ Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
▪ Store the machine with the supplied protection cover(15)
▪ Only use original accessories and spare parts.
10 TECHNICAL DATA
