582048
6
Zoom out
Zoom in
Previous page
1/8
Next page
POWXG2030LI
EN
Copyright © 2013 VARO
P a g e | 6
www.varo.com
8.3 Blade brake
To avoid injuries from moving blade, the blades on your hedge trimmer will stop moving within
0.5 seconds after you release either the safety catch or the deadmans switch.
8.4 Safety cutting bar
The recessed blades reduce the risk of injury from inadvertently touching the blades.
8.5 Cutting hedges
Before you start your work, select branches with a diameter not bigger than +/-11mm and cut
them with a pruning shear. A trapezoidal cut corresponds to the natural, growth of plants and
results in optimal hedge growing.
First cut the sides from the bottom to the top. Cut the upper part giving it the shape you
prefer, in a straight horizontal form, roof-like or rounded.
The safety blade has laterally rounded and staggered cutting teeth to reduce danger of
injury. The additional shock protection avoids inconvenient kickback when the blades
come into contact with walls, fences etc.
If the blades are jammed or blocked by obstacles, switch the motor off immediately,
remove the battery, and then remove the object jamming the blades.
Caution! Metal obstacles like fences etc. may damaged the cutting blades.
9 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, always remove the
battery.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
Always have your hedge trimmer’s blades sharpened or replaced at a qualified workshop
10 STORAGE
Remove the battery pack and keep your hedge trimmer in a safe, dry place out of children’s
reach.
Store the machine with the supplied protection cover (10).
Only use original accessories and spare parts.
11 TECHNICAL DATA
Type
POWXG2030LI
Battery voltage / capacity 18 VDC / 1500mAh
Battery type Li-ion
Cutting capacity 14 mm
Blade length 580 mm
No load speed 1100min
-
Charger
:
Input Voltage ~Frequency 210-240VAC, 50-60 Hz.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG2030LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG2030LI in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG2030LI

Powerplus POWXG2030LI User Manual - German - 10 pages

Powerplus POWXG2030LI User Manual - Dutch - 9 pages

Powerplus POWXG2030LI User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info