582047
10
Zoom out
Zoom in
Previous page
1/14
Next page
POWXG2016 EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
9.2 Safety lock (Fig. 8)
Warning: Stop using the trimmer if the safety lock is defective
Safety lock is the device which stops the throttle lever from being activated unintentionally. If
you push the safety lock, you will activate the throttle lever.
Safety lock:
Check that the throttle lever does not move if you do not push the safety lock.
Check that the throttle lever moves if you activate or release it while pushing the safety
lock.
Check that the safety lock returns to its original position if you take your hand from safety
lock.
If these checks reveal any defects, contact your nearest dealer and ask to have them
repaired
9.3 Air cleaner (Fig. 9)
Release the air cleaner cover and remove the dust. If the element is dirty, clean it by tapping it
or by blowing away the dirt. If the element is bent or damaged, replace it. After you have
cleaned the element reattach it to the cleaner body with the stamp on the outside (facing the
cleaner cover). After that, replace the cleaner cover
Important: a clogged air cleaner reduces engine performance. Operating with no element or
with a bent or damaged element causes irregular wear and tear of the engine mechanism
9.4 Air cooling
This engine is air-cooled. Dust clogging up the air cooling inlet port and the cylinder fins will
cause the engine to overheat. Periodically check and clean the cylinder fins after removing
the air cleaner and the cylinder cover.
9.5 Sparking Plug (Fig. 10)
Starting problems and misfiring are often caused by a fouled sparking plug
Periodically clean the sparking plug, and replace with a new one as and when required.
Important: When dismounting the plug cap, be careful not to remove the
seal. Operating the engine without the seal may cause the engine to
overheat.
Important: When inserting the sparking plug, first screw it in with your
fingers, and then tighten it with the help of a suitable plug spanner.
Overtightening will damage the cylinder and the piston
9.6 Gearbox
Apply multipurpose grease after every 50 hours of use.
9.7 Silencer (Fig. 11)
9.7.1 After 100 hours of use
Check to see if any oil or grease has worked its way in between the clutch lining and drum,
and if it has, wipe it away using oil-free and unleaded petrol
9.7.2 Maintenance before storage
Use a dry rag to wipe away any fuel which has been spilt onto the unit.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG2016 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG2016

Powerplus POWXG2016 User Manual - German - 15 pages

Powerplus POWXG2016 User Manual - Dutch - 15 pages

Powerplus POWXG2016 User Manual - French - 15 pages

Powerplus POWXG2016 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info