582043
5
Zoom out
Zoom in
Previous page
1/7
Next page
POWXG2007 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
When cutting, make sure do not touch objects such as wire fences or plants frame-holder.
Doing so can damage the blade beam.
Hold the electric hedge trimmer with both hands firmly, with one hand on the rear and with
the other hand on the front handle. Thumb and fingers must firmly embraced.
7 OPERATION
7.1 Starting the machine
Switching on: press both the trigger switch (1) and the front handle trigger (2) at the same
time.
Switching off: release one of the switches.
The mechanical blade brake makes the blades stop immediately within 0.5 sec. the small
flash in the area of the upper ventilation slots is normal and does no harm to you or the
machine.
7.2 Cutting hedge
Before you start your work, select branches with a diameter not bigger than 16mm and cut
them with a pruning shear. A trapezoidal cut corresponds to the natural, growth of plants and
results in optimal hedge growing.
First cut the sides from the bottom to the top. Cut the upper part giving it the shape you
prefer, in a straight horizontal form, roof-like or rounded.
The safety blade has laterally rounded and staggered cutting teeth to reduce danger of
injury. The additional shock protection avoids inconvenient kickback when the blades
come into contact with walls, fences etc.
If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull
the plug, and then remove the object jamming the blades.
Caution! Metal obstacles like fences etc. may damaged the cutting blades.
Always make sure to keep the extension cord behind your back and to start cutting the
hedge at the point nearest to the supply socked. Therefore plan your working direction
before staring.
8 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, pull the power
plug.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine. Finally, dry the motor housing carefully.
Store the machine with the supplied protection cover.
Only use original accessories and spare parts.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG2007 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG2007

Powerplus POWXG2007 User Manual - German - 8 pages

Powerplus POWXG2007 User Manual - Dutch - 8 pages

Powerplus POWXG2007 User Manual - French - 8 pages

Powerplus POWXG2007 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info