POWXG1066 EN
Copyright © 2023 VARO P a g i n a | 5 www.varo.com
5.2 Working with the machine
In order to prevent accidents and injuries:
5.2.1 Preparation:
▪ Always wear proper work clothing and protective gear when use:
− Do not wear baggy clothing or jewellery that might get caught in moving parts.
− Keep long hair contained under headwear.
− Wear safety goggles. Negligence could lead to eye injury from flying sparks or grind
particles.
− When working with saw chains wear protective gloves to avoid cut injuries.
− Wear dust mask to avoid inhalation of grind particles.
− Anti-slip footwear is recommended when working.
▪ Make sure no other persons or animals are near the work area. Do not let anyone touch
the machine or cable. Look out especially for children.
▪ Do not use machine when tired or after having consumed alcohol or medication. Do not
work for too long without taking breaks.
▪ Keep work area orderly. Do not leave tools, objects or cables lying around near the work
area. Ensure proper lighting. Risk of accident.
▪ Before using machine inspect perfect working order of safety features and damaged parts
indicator lights. Check that moving parts work flawlessly and do not get stuck. Regularly
check cable. All parts and safety features, such as the transparent safety guard must be
correctly installed and meet all conditions in order to guarantee flawless performance. Do
not use a machine on which the on/off switch cannot be used. Damaged parts must be
repaired or replaced by recognised qualified personnel at specialised work place, unless
otherwise indicated in the instruction manual.
▪ Do not use a damaged or incomplete machine; do not use machine that has been
modified without the manufacturer’s authorisation. Before using check safe condition of
machine and especially of power cable and switch.
▪ Inspect grinding wheel before using; do not use broken, cracked, or otherwise damaged
products. Change worn grinding wheel.
5.2.2 Operation:
▪ Make sure power switch is in off position when connecting machine to electrical mains.
▪ When working ensure safe posture. Avoid abnormal body postures and keep firm balance.
▪ Keep hands at safe distance from grinding wheel and chain saw teeth when machine is in
use. Do not move change with hands. Risk of injury.
▪ Never put fingers between grinding wheel and rotation table or between grinding wheel
and guard plate. Risk of injury.
▪ Chain gets hot during grinding. Do not touch section under treatment. Risk of burn injury.
▪ Always keep an eye on machine and object under treatment. Never use machine when
not concentrated or distracted.
▪ Only use accessories recommended in this instruction manual. Using equipment other
than the indicated can lead to risk of injury. Do not use saw blades.
▪ Switch machine off and disconnect mains plug:
− When machine not in use
− Before performing cleaning, inspection, and maintenance work
− Before changing grinding wheel
− When power chord is damaged or in disarray
− If machine is making unusual noises
▪ This power tool meets the applicable safety regulations. All maintenance work not covered
in this instruction manual may only be carried out at a specialised facility, where only
original spare parts are used. Otherwise, accidents might occur.
