725411
16
Zoom out
Zoom in
Previous page
1/24
Next page
POWXG10220 EN
Copyright © 2018 VARO P a g e | 16 www.varo.com
Caution: while the saw is cutting, be sure the chain and bar are being
properly lubricated.
10.8.5 Spiked Bumper
The Spiked bumper must always be put on, while using the chain saw on tree trunk. Push the
spiked bumper into the tree trunk by using the rear handle. Push the front handle in the direction
of cutting line. The spiked bumper must be remaining set for further saw guiding if necessary.
Use a spiked bumper when cutting trees and thick branches can ensure your safety and
decrease the working strength and vibration level.
If there’s barrier between the cutting material and chainsaw, turn off the machine. Wait until it
stops completely. Wear the safety glove and remove the barrier. If the chain must be removed,
please follow the instruction of relevant part like installation in manual. A trial run must be
conducted after the cleaning and newly installation. If vibration or mechanical noise is
discovered, please stop the use and contact your dealer.
11 MAINTENANCE INSTRUCTIONS
All chain saw service, other than items listed here in your user manual maintenance instructions,
should be performed by a professional.
11.1 Preventive maintenance
A good preventive maintenance program of regular inspection and care will increase life and
improve performance of your chain saw. This maintenance checklist is a guide for such a
program. Cleaning, adjustment, and parts replacement may be required, under certain
conditions, at more frequent intervals than those indicated.
Maintenance checklist
Each use
Hours of Operation
Item
Action
10
20
Screws/nuts/bolts
Inspect/tighten
V
Air filter
Clean or replace
V
Fuel filter/oil filter
Replace
V
Spark plug
Clean/adjust/replace
V
Fuel hoses
Inspect
V
Replace as required
Chain brake components
Inspect
V
Replace as required
Air filter: Regularly check and clean the filter element. Replace if necessary.
11.2 Winter maintenance
Your chain saw requires a winter maintenance. Please contact your local dealer for this.
It includes the following:
Replacing spark plug
Sharpening the chain
Cleaning of air filter (Replacement if necessary)
Cleaning of guide bar
Oil pump check up
Thorough cleanup
Fine tuning and testing
11.3 Air filter
Caution: never operate saw without the air filter. Dust and dirt will be drawn
into engine and damage it. Keep the air filter clean!
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG10220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG10220 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG10220

Powerplus POWXG10220 User Manual - German - 27 pages

Powerplus POWXG10220 User Manual - Dutch - 25 pages

Powerplus POWXG10220 User Manual - French - 26 pages

Powerplus POWXG10220 Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info