POWX5100 EN
Copyright © 2022 VARO P a g e | 6 www.varo.com
6.3 Fuel is highly flammable and poisonous
Danger for fire /intoxication.
▪ Always turn off the engine when refueling, allow generator to cool down before refueling.
▪ Never refuel while smoking or in the vicinity of an open flame.
▪ Take care not to spill any fuel on the engine or muffler when refueling. Wipe up spilt petrol
immediately
▪ If you swallow any fuel, inhale fuel vapor, or allow any to get in your eyes, see your doctor
immediately. If any fuel spills on your skin or clothing, immediately wash with soap and
water and change your clothes.
▪ When operating or transporting the machine, be sure it is kept upright. If it tilts, fuel may
leak from the carburetor or fuel tank.
6.4 Engine and muffler can be very hot
Danger for burning
▪ Place the machine in a place where pedestrians or children are not likely to touch the
machine.
▪ Avoid placing any flammable materials near the exhaust outlet during operation.
▪ Keep the machine at least 1 m ( 3 ft ) from buildings or other equipment, or the engine
may overheat.
▪ Avoid operating the engine with a dust cover.
▪ After operation, allow to cool down before storage
6.5 Electric shock prevention
Danger of electric shock
▪ Incorrect electric installation can lead to electric shock !
▪ Never operate the engine in rain or snow.
▪ Never touch the machine with wet hands or electrical shock will occur.
▪ Be sure to ground (earth) the generator.
6.6 Connection notes
▪ Avoid connecting the generator in parallel to the commercial mains power network.
▪ Avoid connecting the generator in parallel with any other generator.
6.7 Personal protection
▪ Please wear the earplug when operate the machine.
7 ASSEMBLY (FIG. 1)
Tilt your device so the muffler points upwards.
7.1 Assembly wheel axis
Mount the wheel axles on the lower side of the frame in the foreseen openings with 4 M8x20
bolts and nuts.
7.2 Assembly of rubber feet
Mount the two rubber feet with supplied 4 2 bolts M6x20 and 4 2 nuts M6.
