795751
6
Zoom out
Zoom in
Previous page
1/9
Next page
POWX3230 EN
Copyright © 2023 VARO P a g e | 6 www.varo.com
Turn the tub upright again.
Re-fit the motor housing.
7.2 Mounting the hose
Insert the hose (8) in the connection (6) and press it on firmly.
7.3 Fitting and removing the motor housing
The motor housing has been locked to the tub with clamps.
To remove the motor housing (3). First remove the clamps (6) and then lift it from the tub
(7).
To re-fit the motor housing, place it on the tub and tighten the damps.
7.4 Fitting the dust bag
A dust bag is suitable for collecting small waste material and dust.
Remove the motor housing (3).
Suspend the dust bag in the tub.
Re-fit the motor housing.
7.5 Mounting the tube to the hose
Slide the tube on the handgrip (9).
Place the required nozzle on the tail end of the tube.
8 OPERATION
Make sure the power cord has been fully unwound before you switch on the machine. The air
leaving the grids must not be hindered.
When using the machine in combination with an electrical tool, switch on the machine first and
then the electrical tool.
8.1 Switching on and off
To switch the machine on, set the on/off switch (1) to “I”.
To switch the machine off, set the on/off switch (1) to "0".
8.2 Vacuuming up waste material
Check whether the dust bag (14) has been fitted.
Mount the universal nozzle (11) to the tube (10).
8.3 Vacuuming up dust released from an electrical tool
Check whether the dust bag (14) has been fitted.
Connect the hose with the handgrip (9) directly to the dust extraction outlet of the electrical
tool.
8.4 Vacuuming up liquids
Check whether the new advanced dust filter and dust bag has been removed.
The sponge filter (18) must be used for vacuuming liquids.
Install the sponge filter (18)
Make sure the inside of the tub (5) is clean and free from dust.
Mount the tube (10) to the handgrip of the hose (9). Leave an opening at the top of the
universal nozzle in order to enable the air flow.
8.5 Blowing
You can also use this tool to blow away dust, leaves etc. Disconnect the hose from the
hose connection (6) on the side of the tub and connect the hose to the special connection
for the blow function (16) on top of the tool.
8.6 Emptying the tub
Switch off and unplug the machine.
Remove the motor housing (3).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX3230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX3230 in the language / languages: English as an attachment in your email.

The manual is 0.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX3230

Powerplus POWX3230 User Manual - German - 10 pages

Powerplus POWX3230 User Manual - Dutch - 10 pages

Powerplus POWX3230 User Manual - French - 10 pages

Powerplus POWX3230 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info