POWX322 EN
Copyright © 2023 VARO P a g e | 7 www.varo.com
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Do not submerge the motor housing in water!
9.2 Cleaning the tub
▪ Empty and clean the tub (7) after each use.
▪ Dry the tub carefully after the machine has been used for vacuuming up liquids.
9.3 Cleaning the dirt filter
▪ Shake out the dust from the dirt filter (14) after each use.
10 TECHNICAL DATA
11 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a specialist (qualified electrician).
