POWX1700 EN
Copyright © 2020 VARO P a g e | 6 www.varo.com
▪ Always disconnect the air supply and power supply before making adjustments, servicing
an inflator, or when an inflator is not in use.
▪ Do not attempt to pull or carry the inflator by the hoses.
▪ Always follow all safety rules recommended by the manufacturer of your inflator, in
addition to all safety rules for the inflator. Following this rule will reduce the risk of serious
personal injury.
▪ Household use only.
▪ Do not use inflator as a breathing device.
▪ Never direct a jet of compressed air toward people or animals. Take care not to blow dust
and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
▪ Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule
will reduce the risk of serious personal injury.
▪ Do not use this inflator to spray chemicals. Your lungs can be damaged by inhaling toxic
fumes.
▪ Check damaged parts. Before further use of the inflator or air tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate properly and
perform its intended function.
▪ Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service center.
Following this rule will reduce the risk of shock, fire, or serious injury.
▪ Inspect tool cords periodically and, if damaged, have repaired at your nearest Authorized
Service Center.
▪ Constantly stay aware of cord location. Following this rule will reduce the risk of electric
shock or fire.
▪ Risk of bursting. Carefully monitor objects during inflation.
▪ To reduce the risk of over inflation, use a reliable pressure gauge periodically during
inflation. The pressure guage on the inflator is for reference only and is therefore not
binding for exact values.
▪ Never leave the inflator unattended during inflation.
▪ Allow pump to cool for five (5) minutes after each five (5) minutes of continuous use.
Never block the inflating or deflating outlets while operating.
▪ Save these instructions. Refer to them frequently and use them to instruct others who may
use this inflator.
▪ If you loan someone this inflator, loan them these instructions also.
7 OPERATION
7.1 Charging the battery
▪ The green light of the charger stand is on when the power is input;
▪ The red light on the base of the battery is on when charging but the electricity is not
enough;
▪ The green light on the base of the battery is on when charging and sufficient electricity.
7.2 Connecting and removing the battery
7.2.1 To install:
▪ Place the battery pack in the tool. Align the rib on the battery pack with groove in the
battery port.
▪ Make sure the latches on the battery pack snap in place and that the battery pack is
secured in the tool before beginning operation.
