POWX147 EN
Copyright © 2021 VARO 2 www.varo.com
▪ Avoid charging your battery in freezing conditions as charging power will not be
sufficient.
NOTE: If the tool will not be used for long periods of time, charge the battery
every 3-6 months.
NOTE: To prevent damage to the battery, when charge runs out, charge the
battery to reach full or no less than half charge before storage.
3.2 How to use the glue gun
▪ Insert a glue stick into the glue stick inlet of the gun (Fig. 1).
▪ Switch on: Press and hold the switch button (4) 1 s, the heating indicator (2) and
indicator (5) lights. Use the removable stand (9) and rest the gun on a stable flat
surface. The removable stand can be pushed back when in use (Fig. 2 & 3).
NOTE: The indicator (5) can be indicated the battery level through by single
click on the switch button (4):
Green: Enough power;
Red: Low power.
▪ Allow the gun to heat up, Red: Operation after preheating 25 s.
▪ Before starting to use the glue gun, ensure all surfaces to be glued are clean and dry.
▪ Press the trigger (8) until the glue starts to flow from the nozzle (1).
▪ Apply the glue to one surface. Press the surfaces together and hold for 15-20 s.
▪ After use, switch off: Press and hold the switch button (4) 1 s and all indicators (2 & 5)
extinguishes.
NOTE: If the indicator (5) turns red, the battery needs to be charged. Turn
off the appliance and connect the tool to the charging interface.
3.3 Automatic shut-off
NOTE: The glue gun switches off automatically after 10 minutes in order to
save energy.
