676270
7
Zoom out
Zoom in
Previous page
1/9
Next page
POWX146 EN
Copyright © 2018 VARO P a g e | 7 www.varo.com
8.2.4 Gluing techniques
To be able to attach different materials in an optimal manner by gluing, the following two
gluing techniques are recommended:
Glue lines in a zig-zag pattern for flexible materials such as textiles.
Spot-gluing should be used for all other materials.
After applying glue to both sides of the working pieces, immediately press them together
for approximately 30 seconds.
Continue to apply pressure to all glued spots for another five minutes, for instance by
weighing them down.
8.3 Working with the mains cable
Work with a mains cable, if you want to glue several spots in succession.
Adjust the tool and the support bracket (11).
Connect your glue gun to power and let it heat up for at least 5 minutes.
Pull the trigger back towards the handle (4), for pushing the hot-melt stick further into the
heating duct and for pushing the fluid blew through the nozzle.
Glue working pieces.
8.4 Working without the mains cable
Work without mains cable if …
- you only want to glue a single or a few spots
- are planning complicated gluing procedures, which require that you would turn off the tool in
between.
Position the tool in the loading station (6). Please make sure that the nozzle is positioned
precisely over the drip tray (8)
Connect the loading station (6) and let the tool heat up for a maximum of 5 minutes.
The device is now ready to use
As soon as the hot-melt glue is no longer sufficiently fluid, reinsert the tool in the loading
station (6) and heat it up once more.
8.5 Changing the nozzle
Danger of burns ! The hot-melt glue and the nozzle reach temperatures of
up to 200°C. Before nozzles can be exchanged, you must turn off the tool
and let it cool off for approximately 20 to 30 minutes.
Pull out the mains plug.
Screw off the nozzle (1) at the front of the tool
If you are unable to unscrew the nozzle by hand : Remove the rubber cap from the nozzle and
unscrew it.
Screw in a different nozzle (1) into the thread and up to the stop. When screwing in the
nozzle, make sure it is positioned correctly.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX146 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX146

Powerplus POWX146 User Manual - German - 10 pages

Powerplus POWX146 User Manual - Dutch - 10 pages

Powerplus POWX146 User Manual - French - 10 pages

Powerplus POWX146 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info