645074
6
Zoom out
Zoom in
Previous page
1/12
Next page
POWX1425 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
Do not bring your hands in the cutting area and the saw blade.
Keep in mind that even a worn saw blade is still very sharp. Always grasp the saw blade
on the sides. Do not fling the saw blade and do not drop it.
Never use the plunge saw with grinding wheels.
Do not grip underneath the workpiece. The protective cover cannot protect you from the
saw blade under the workpiece.
Adjust the cutting depth to the thickness of the workpiece. It should be visible less than a
full tooth height under the workpiece.
Do not cut very small workpieces. When cutting round wood, use a device which secures
the workpiece from twisting. Never hold the workpiece to be cut in your hand or across
your leg. It is important to secure the workpiece properly to minimise the risk of physical
contact, jamming of the saw blade or loss of control.
Hold the saw only by the insulated gripping surfaces when performing an operation
where the cutting tool may come into contact with hidden power lines or its own device
cable. Contact with a live wire also exposes the metal parts to tension and leads to an
electric shock.
Use always saw blades in the correct size and with suitable locating bore. Saw blades that
do not match the mounting parts of the saw will run unevenly and lead to loss of control.
Never use a damaged or incorrect outer flange or a damaged clamping screw. The outer
flange and the clamping screw have been specially designed for your saw for optimum
performance and reliability.
Start the plunge saw and begin cutting when it reaches the full idling speed.
Never brake the saw blade using lateral pressure after switching it off.
Set the saw aside only when the saw blade comes to a standstill.
Do not expose the saw to high temperatures, humidity and strong shocks. The saw can be
damaged as a result.
Hold the saw firmly with both hands and bring your arms into a position in which you can
resist the kickback forces
7 CAUSES AND PREVENTION OF KICKBACK
A kickback is the sudden reaction as a result of a stuck, jammed or misaligned saw blade
which leads to an uncontrolled saw to be lifted and moved from the workpiece out in the
direction of the operator.
A kickback can occur when the saw blade gets stuck or jammed in the saw gap. The saw
blade is blocked and the motor force repels the circular saw in the direction of the
operator.
A kickback can occur when the saw blade becomes twisted or misaligned in the saw
groove. As a result, the teeth of the back edge of the saw blade can get stuck in the
surface of the workpiece, whereby the saw blade is moved out of the saw gap and the saw
jumps back in the direction of the operator.
A kickback is the result of incorrect or faulty use of the saw. It can be prevented by
appropriate precautions as described below.
Hold the saw firmly with both hands and bring your arms into a position in which you can
resist the kickback forces. Always hold the saw baldes on the sides, never bring the blade
in line with your body. In a kickback, the saw can jump backwards, but the operator can
control the kickback forces if appropriate measures were taken.
If the saw blade jams or sawing is interrupted for any reason, release the ON / OFF switch
and calmly hold the saw in the material until the saw blade stands completely still. Never
attempt to remove the saw from the workpiece or pull it backwards as long as the saw
blade is moving or a kickback might occur. Find the cause of the saw blade jam and
eliminate them through appropriate measures.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1425 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1425

Powerplus POWX1425 User Manual - German - 14 pages

Powerplus POWX1425 User Manual - Dutch - 14 pages

Powerplus POWX1425 User Manual - French - 13 pages

Powerplus POWX1425 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info