645725
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWX1350 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
7.3 Chisel and plane sharpener
Regrinds chisel and plane blade up to 50mm wide
Adjustable grinding angle from 15°-5
Powerful integral magnet to keep the blade secure
Protective shield for added safety
SHARPENING BLADES (3a-3g)
1. Slide module ‘chisel and plane sharpener’ onto the power unit
2. Place the blade against the back lip of the plate (3a). The magnet helps hold in
place.
3. The sharpening angle must match the existing beveled angle on the blade tip.
Adjust if necessary.
4. To alter the angle, loosen the angle adjusting knob (3c), adjust the plate and then
tighten the angle adjusting know.
5. Make sure the blade edge touches the grinding wheel, then switch the Power Unit
on.
6. Slide the blade and plate with light steady pressure back and forth across the
grinding wheel in a continuous motion (3d). Do not hold the blade stationary, this
causes irregular sharpening.
7. Gradually adjust the blade down the plate while sharpening (3e). Do not press hard.
Grind gradually. Repeat if necessary.
8. Remove the blade and make sure the beveled edge and tip are evenly sharp. If not,
adjust the grinding angle. It is important that the sharpening angle matches the
existing beveled angle of the blade. This avoids removing too much mental
unnecessarily and keeps plane blades at their optimum shaving angle (3f)
9. When sharpening thin chisel blades, place the small chisel guide onto the plate to
act as a spacer and sharpen as before (3g)
10. Switch the Power Unit off. Before removing the module, ensure that the grinding
wheel has stopped
11. Recommend that after grinding, the blade tip is honed on an oil stone.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1350 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1350

Powerplus POWX1350 User Manual - German - 10 pages

Powerplus POWX1350 User Manual - Dutch - 10 pages

Powerplus POWX1350 User Manual - French - 10 pages

Powerplus POWX1350 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info