645721
9
Zoom out
Zoom in
Previous page
1/13
Next page
POWX13302 EN
Copyright © 2015 VARO P a g i n a | 9 www.varo.com
7.4.2 Mounting/Replacing the Application Tool/ Accessory
If required, remove an already mounted application tool/accessory.
For removing the application tool/accessory, loosen the screw with the Allen key and
remove the application tool/accessory.
Mount the requested application tool/accessory in such a manner on the tool holder that
the offset faces downward.
Turn the application tool/accessory to a position favourable for the respective job, and
allow it to engage into the cams of the tool holder.
Fasten the application tool/accessory with the bolt. Tighten the bolt with Allen key until the
spring washer of the bolt faces flush against the application tool/accessory.
Check the tight seating of the application tool/accessory. Incorrect or not
securely fastened application tools/accessories can come loose during
operation and pose a hazard.
7.4.3 Mounting/Replacing a Sanding Sheet on the Sanding Plate
The sanding plate is fitted with Hook & loop backing for quick and easy fastening of
sanding sheets with Hook & loop adhesion.
Before attaching the sanding sheet, free the Hook & loop backing of the sanding plate
from any debris by tapping against it in order to enable optimum adhesion.
Position the sanding sheet flush alongside one edge of the sanding plate, then lay the
sanding sheet onto the sanding plate and press firmly.
To remove the sanding sheet, grasp it at one of the tips and pull it off from the sanding
plate.
8 OPERATION
8.1 Switching ON/OFF
Make sure the fully charged battery pack is installed.
Switch the power tool on: push the ON/OFF switch button forwards to the “0” position.
Switch the power tool off: pull the ON/OFF switch button backwards to the1” position.
8.2 Adjusting the frequency
Adjust the frequency according to the application before beginning with the work. For example,
we recommend a high frequency for work with the scraper. Conduct a test run in order to find
a suitable frequency.
The frequency controller can be set at 6 positions. The “1”position indicates the lowest
frequency and the“6”position indicates the highest. The operator may have to vary the speed
to optimize cutting efficiency.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX13302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX13302 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX13302

Powerplus POWX13302 User Manual - German - 13 pages

Powerplus POWX13302 User Manual - Dutch - 13 pages

Powerplus POWX13302 User Manual - French - 13 pages

Powerplus POWX13302 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info