481033
4
Zoom out
Zoom in
Previous page
1/24
Next page
POWX0761 EN
Copyright © 2008 VARO P a g e | 4 www.varo.com
FLIP OVER SAW 1400W
POWX0761
1 APPLICATION
The tool is intended for accurate straight and Mitre cutting in wood. The tool can be used both
in Mitre saw mode and in table saw mode by turning over the table around its axis.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION
1. Adjusting bolt
2. Foot
3. /
4. Hex. bolt
5. U-shaped grooves
6. Lower blade guard
A
7. Lower blade guard
B
8. Lower blade guard
C (used in the Mitre
saw mode only)
9. Push button
10. Riving knife
11. Top blade guard
(used in the table
saw mode)
12. Top surface of turn
table
13. Periphery of blade
14. Guide fence
15. Lower limit stopper
16. Nut
17. Clamping screw
18. Handle
19. Turn table
20. Lever
21. Cutting depth
adjusting knob
22. Switch in the Mitre
saw mode
23. Switch in the table
saw mode
24. Lock-off button
25. Switch lever
26. On button
27. Off button
28. Stopper pin
29. Socket wrench
30. Wrench holder
31. Feet
32. /
33. /
34. Shaft lock
35. Lifting lever
36. Saw blade
37. Blade case
38. Arrow
39. Outer flange
40. Inner flange
41. Spindle
42. Ring
43. Clamping nut
44. Blade width
45. Rip fence holder
46. Guide rail
47. Clamping screw (A)
48. Clamping screw (B)
49. Rip fence
50. Line to be aligned
with: Line (A)
51. Top table
52. Workpiece
53. Square nut
54. Scale
55. Adjusting screw
56. Top blade guard
57. Mitre gauge fence
58. Mitre gauge
59. Groove
60. Dust nozzle
61. Dust bag
62. Fastener
63. /
64. Vise arm
65. Vise rod
66. Vise knob
67. Saw head locked in
the fully lowered
position
68. Area of lever for
hand/finger to be
placed on
69. Hooking parts
70. Sub fence L
71. Sub fence R
72. Pin
73. Vise (accessory)
74. Spacer block
75. Aluminum extrusion
76. Face/edge parallel
77. Wood screw
78. Guide together
79. Push stick
80. Auxiliary fence
81. Push block
82. Cross cutting
83. Mitreing
84. Bevel cutting
85. Compound Mitreing
(angles)
86. Knob
87. Tool part to be held
carrying
88. Triangular rule
89. 0° adjusting bolt
90. 45° adjusting bolt
91. Arm
92. Bevel scale
93. Pointer
94. Limit mark
95. Brush holder cap
96. Screwdriver
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0761 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0761 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0761

Powerplus POWX0761 User Manual - German - 29 pages

Powerplus POWX0761 User Manual - Dutch - 28 pages

Powerplus POWX0761 User Manual - French - 28 pages

Powerplus POWX0761 Additional guide - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info