675036
4
Zoom out
Zoom in
Previous page
1/24
Next page
POWX07587 EN
Copyright © 2017 VARO NV P a g e | 4 www.varo.com
FLIP OVER SAW 2000W
POWX07587
1 APPLICATION
The tool is intended for accurate straight and Mitre cutting in wood. The tool can be used both
in Mitre saw mode and in table saw mode by turning over the table around its axis.
Het apparaat is niet voor industrieel gebruik bestemd.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION
1. Adjusting bolt
2. Foot
3. Hex. bolt
4. U-shaped grooves
5. Lower blade guard
A
6. Lower blade guard
B
7. Lower blade guard
C (used in the Mitre
saw mode only)
8. Push button
9. Riving knife
10. Top blade guard
(used in the table
saw mode)
11. Top surface of turn
table
12. Periphery of blade
13. Guide fence
14. Lower limit stopper
15. Nut
16. Clamping screw
17. Handle
18. Turn table
19. Lever
20. Cutting depth
adjusting knob
21. Switch in the Mitre
saw mode
22. Switch in the table
saw mode
23. Lock-off button
24. Switch lever
25. On button
26. Off button
27. Stopper pin
28. Shaft lock
29. Lifting lever
30. Saw blade
31. Blade case
32. Arrow
33. Outer flange
34. Inner flange
35. Spindle
36. Ring
37. Clamping nut
38. Blade width
39. Rip fence holder
40. Guide rail
41. Clamping screw (A)
42. Clamping screw (B)
43. Rip fence
44. Line to be aligned
with: Line (A)
45. Top table
46. Workpiece
47. Clamping nut
48. Winkel
49. Adjusting screw
50. Top blade guard
51. Mitre gauge fence
52. Mitre gauge
53. Groove
54. Dust nozzle
55. Dust bag
56. Fastener
57. Vise arm
58. Vise rod
59. Vise knob
60. Saw head locked in
the fully lowered
position
61. Area of lever for
hand/finger to be
placed on
62. Locking
mechanism for saw
table
63. Sub fence L
64. Sub fence R
65. Pin
66. Vise (accessory)
67. Spacer block
68. Aluminum extrusion
69. Face/edge parallel
70. Wood screw
71. Guide together
72. Push stick
73. Cross cutting
74. Mitreing
75. Bevel cutting
76. Compound Mitreing
(angles)
77. Knob
78. Tool part to be held
carrying
79. Triangular rule
80. 0° adjusting bolt
81. 45° adjusting bolt
82. Lever
83. Bevel scale
84. Pointer
85. Limit mark
86. Brush holder cap
87. Screwdriver
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07587 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07587 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07587

Powerplus POWX07587 User Manual - German - 28 pages

Powerplus POWX07587 User Manual - Dutch - 27 pages

Powerplus POWX07587 User Manual - French - 27 pages

Powerplus POWX07587 Additional guide - All languages - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info