675034
10
Zoom out
Zoom in
Previous page
1/13
Next page
POWX07573T EN
Copyright © 2016 VARO P a g e | 10 www.varo.com
Switch on the power tool.
Move the handle (15) slowly downwards. You have to push the safety switch (17) before
you can do this.
For long workpieces you should use the slide; loosen the locking knob for this purpose.
Saw trough the work piece.
Switch off the power tool.
Wait until the saw blade (2) has come to a complete standstill before removing the work
piece.
9.13 Sawing special work pieces
Curved or round work pieces need to be secured against slipping.
Make sure there is no gap between the work piece and the fence (4) or the saw table (5).
9.14 Replacing the saw blade (Fig. 4)
Disconnect the tool from the outlet before working on the saw blade.
Wait a while before touching the saw blade. It can be very hot.
The teeth of the saw blade are very sharp.
Remove the two screws and turn the plastic covers upwards, so that you can see the
attachment bolt of the saw blade.
Push in the blocking knob, position the supplied key on the bolt and loosen the bolt in a
clockwise direction.
Pull the mitre saw downwards and lock it in the lowest position by pushing the retaining
pin.
Remove the front mounting screw from the protective hood
Turn the centre cover and raise the blade guard.
Press the spindle lock.
Then remove the screw, outer flange and blade.
Replace the saw blade (the tips of the sawing teeth have to point in the same direction as
indicated by the arrow on the cover) and then resassemble all parts in the reverse order.
Turn the plastic cover back in its original position and mount the front mounting screw from
the protective hood.
When replacing the saw blade, you can tighten the slide bar with the
locking knob (23).
10 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
10.1 Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07573T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07573T in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07573T

Powerplus POWX07573T User Manual - German - 14 pages

Powerplus POWX07573T User Manual - Dutch - 14 pages

Powerplus POWX07573T User Manual - French - 14 pages

Powerplus POWX07573T Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info