582663
7
Zoom out
Zoom in
Previous page
1/11
Next page
POWX0560 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7 ADJUSTMENTS
7.1 Plunge saw feature
7.1.1 Selector switch
Use the selector switch (17) to set the respective operation mode.
Change Saw Blade
Plunge Cut
Marked Cut
7.2 Guide rails and clamps (Fig. 1)
The guide rails allow precise and clean straight cuts, miter cuts and fitting. The rails also
protect the work piece surface from damages.
Fixing with the clamps ensures solid grip and safe work.
Place the guide rail on the work piece and fix the guide rail with the clamps. Slide the bar
into the groove of the guide rail and tighten the clamp with the lever.
Place the plunge saw on the guide rail. The base plate has a groove (13), which exactly
fits into the guide ridge of the rail.
8 OPERATION
8.1 Switching ON/OFF
Press the switch lock (2) and then the ON/OFF switch (1) to switch the plunge saw on.
Release the ON/OFF switch (1) to switch the plunge saw off.
Notes: Pressing the switch lock (2) unlocks the plunge cut mechanism at the same time, so
that the motor can be moved downwards. The saw blade emerges from the protective cover.
When lifting the saw the motor slides back into the initial position.
8.2 Setting the cutting depth
The cutting depth can be set between 0 - 54 mm:
Loosen the cutting depth limit stop knob (9) and slide it to the desired cutting depth
according to the graduated scale (11) to set the cutting depth.
Note: The graduated values on the scale (11) apply for straight cuts (90° cut).
The guide rail depth adjustment stopper (10) must be tilted up when using the plunge saw
without guide rail. Only when using the plunge saw with guide rail, the guide rail depth
adjustment stopper is used to compensate for the thickness of the guide rail.
Using the guide rail = guide rail depth adjustment stopper down.
Not using the guide rail = guide rail depth adjustment stopper up.
Tighten the cutting depth limit stop knob (9). The motor or respectively the saw blade can
now be pushed down to the set cutting depth.
For a clean, safe cut set the cutting depth in such way that only max. one saw blade tooth
protrudes under the work piece.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0560 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0560

Powerplus POWX0560 User Manual - German - 12 pages

Powerplus POWX0560 User Manual - Dutch - 11 pages

Powerplus POWX0560 User Manual - French - 12 pages

Powerplus POWX0560 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info