645084
6
Zoom out
Zoom in
Previous page
1/9
Next page
POWX0440 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
Remove dust and other waste matter in an environmentally safe way.
Take special care when sanding lead based paint:
All persons entering the work area, must wear a mask specially designed for protection
against lead paint dust and fumes.
Children and pregnant women must not enter the work area.
Do not eat, drink or smoke in the work area.
7 ASSEMBLY
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
7.1 Fitting the sanding sheets
7.1.1 Hook-and-loop system (Fig 1)
To attach sand paper (7), first remove all dirt or foreign matter from the sanding plate (5).
Then attach the sand paper to the sanding plate, using the hook-and-loop system of the
sand paper and the sanding plate.
Make sure the perforations in the paper coincide with those on the sanding plate, to
ensure optimal dust collection.
The sand paper should rest flush on the sanding plate and must not come loose.
WARNING: When removing the sanding paper, follow the above procedure
in reverse order.
7.1.2 With paper clamps (4)
Open the paper-clamps (4) on both sides of the sanding plate (5) as the direction of arrow
shows on the Fig. 2 and remove the worn-out sand paper.
Place a new sand paper on the sanding plate observing the holes in the sand paper fit to
the holes of the sanding plate.
Bend the paper to the sanding plate and fasten one clamp (4) first. Press the sand paper
against the sanding plate, bend the other end and fasten second clamp.
Attention: This finishing sander is not suitable for wet sanding jobs.
WARNING: The sand paper must be fitted firmly on sanding plate and
should not come loose.
8 OPERATION
8.1 Switch on and off
Connect the plug to the power supply.
Switch the power tool on: push the ON/OFF switch button (2) forwards onto the “I
position.
Switch the power tool off: pull the ON/OFF switch button backwards to the “O” position.
WARNING: Never use the machine for sanding magnesium work piece.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0440 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0440

Powerplus POWX0440 User Manual - German - 10 pages

Powerplus POWX0440 User Manual - Dutch - 10 pages

Powerplus POWX0440 User Manual - French - 10 pages

Powerplus POWX0440 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info