645094
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWX0077LI EN
Copyright © 2013 VARO P a g e | 7 www.varo.com
9 OPERATION
9.1 Charging the battery pack (Fig. 2)
The battery pack for the reciprocating saw has been shipped in a low charge condition to
prevent possible problems. You should charge them prior to use.
Note: Batteries will not reach full charge the first time they are charged.
Allow several cycles for the item to fully charge. The battery should only be
charged indoors.
After normal use, about 1 hour of charging time is required for the battery to be fully charged.
The battery pack will become slightly warm while charging, this is normal and does not
indicate a problem.
Do not place the charger in an area of extreme heat or cold. Best is at normal room
temperature.
9.1.1 Charging indication
The charger has 2 LED lights (red and green).
Slide the battery pack in the charger as shown in fig. 2. Make sure there is proper contact
with the charger.
When charging the green is constantly lit and the red is flashing.
When fully charged both lights will be constantly lit.
9.2 Inserting and removing the battery (Fig. 3)
Remove the battery pressing the battery latches and at the same time pull the battery
pack off.
To insert the battery, push the battery pack onto the contacts of the tool.
9.3 Switch on/off (Fig. 4)
To switch on, push the lock button (4) and at the same time the ON/OFF switch trigger (3).
To switch off simply release the ON/OFF switch trigger (3).
9.4 To change position of the pivot shoe assembly (Fig 5)
Loosen the both cap screws (6) in the gear frame with hex key.
Reposition pivot shoe (1) assembly in or out.
Retighten both cap screws (6) securely. Do not over tighten cap screws (6).
Remove hex key.
WARNING: Cutting into electrical wiring in walls can cause blade, blade
clamp, and saw bar assembly to become electrically live. Do not touch
metal parts when cutting into a wall; grasp only the insulated gripping
surfaces provided by the tool. Make sure hidden electrical wiring, water
pipes, and mechanical hazards are not in the blade path when cutting into a
wall.
9.5 General cutting
Clamp your work piece if it is portable. Rest the front shoe of the saw on your work piece (be
sure the blade is not contacting the work piece) and start the saw, exerting enough pressure in
the direction of the cut to keep the shoe pressed firmly against the work piece at all times. Do
not force the cut or stall the saw. Don’t bend or twist the blade, let the tool and the blade do
the work.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0077LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0077LI in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0077LI

Powerplus POWX0077LI User Manual - German - 11 pages

Powerplus POWX0077LI User Manual - Dutch - 11 pages

Powerplus POWX0077LI User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info