582668
8
Zoom out
Zoom in
Previous page
1/12
Next page
POWX0075LI EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
NOTE: Remove battery pack from charger stand which use your thumb or
fingers, press the batterys release button in and pull the battery pack off at
the same time.
8.2 Inserting and removing the battery (Fig 2)
Remove the battery pressing the battery latches and at the same time pull the battery
pack off.
To insert the battery, push the battery pack onto the contacts of the tool.
8.3 Replacing saw blades (See Fig. 3)
Disconnect the battery pack (5) from the cordless jig saw.
Pull the lever of quick-change blade clamping holder.
Slide the saw blade (11) into the locating groove with teeth pointing forward. Make sure
that the back edge of the blade fits into the blade clamping holder (10) and then release
the lever of quick-change blade clamping holder.
NOTE: Make sure that the back of the saw blade engages in the slot of the
guide roller (9).
Mounting battery pack (5) onto jig saws body and runs smoothly before using it to cut any
materials.
8.4 Angle cutting adjustment (See Fig 4)
The base plate (8) can be adjusted 45° (left or right) in relation to the saw direction to facilitate
contour sawing. Loosen the two screws under the base plate by using an inner hexagon
wrench (A), adjust the plate to the desired angle and retighten the screws (B)
Angle setting can be seen on scale on top of the base plate.
8.5 Switch on and off (See Fig. 5)
Connect the battery pack (5) to the cordless jig saw and ensure it firmly.
To switch on the jig saw, push the lock button (1) to left or right as the arrows shown and
press the ON/OFF switch trigger (2)
When you release the switch trigger (2), the tool turns off.
8.6 Cutting-Orbital or Straight (Pendulum switch)(7)
This jig saw is equipped with four cutting actions, one straight and three orbital. Orbital action
has a more aggressive blade motion and is designed for cutting in soft materials like wood or
plastic. Orbital action provides faster cut, but with a rougher cut across the material. In orbital
action, the blade moves forward during the cutting stroke in addition to the up and down
motion.
Note: Metal or hardwoods should never be cut in orbital action. To adjust
the cutting action, moves the orbital switch knob between the four cutting
positions: 0, I, II, and III. Position 0 is the straight cutting. Positions I, II and
III are orbital cutting. The aggressiveness of the cut increase as the knob is
moved from one to three, with three being the most aggressive cut.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0075LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0075LI in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0075LI

Powerplus POWX0075LI User Manual - German - 13 pages

Powerplus POWX0075LI User Manual - Dutch - 12 pages

Powerplus POWX0075LI User Manual - French - 12 pages

Powerplus POWX0075LI Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info